(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 284:2013-04
Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012)
Действует
Печатная копияПечатное издание
114.98 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
53.040.20 Components. Including conveyor belts, chains, chain wheels, etc. / Компоненты для конвейеров. Включая конвейерные ленты, цепи, звездочки и т.д.
Описание
This International Standard specifies the maximum electrical resistance of a conveyor belt and the
corresponding test method.
The test is intended to ensure that the belt is sufficiently conductive to avoid the accumulation of
electrical static charge which may be developed during service use.
This International Standard is not suitable or applicable to light conveyor belts as described in
ISO 21183-1[1], the static electrical properties of which are measured by ISO 21178[2].
Diese Internationale Norm legt den größten elektrischen Widerstand eines Fördergurtes und das
entsprechende Prüfverfahren fest.
Mit der Prüfung soll sichergestellt werden, dass der Gurt genügend leitfähig ist, um eine Erhöhung
elektrostatischer Aufladungen zu verhindern, die während des Betriebes entstehen können.
Diese Internationale Norm ist nicht geeignet oder anwendbar für leichte Fördergurte, die in EN 21883-1 [1]
beschrieben sind. Deren elektrische Eigenschaften werden nach EN 21178 [2] gemessen.
Ключевые слова:
Stetigförderer, Fördergurt, elektrische Leitfähigkeit, Spezifikation, Prüfverfahren