(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 6508-1:2006-10
Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005)
Заменен
Печатная копияПечатное издание
128.52 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
77.040.10 Mechanical testing of metals / Механические испытания металлов
Описание
This part of ISO 6508 specifies the method for Rockwell and Rockwell superficial hardness tests (scales and
field of application according to Table 1) for metallic materials.
Attention is drawn to the fact that, in this part of ISO 6508, the use of hardmetal for ball indenters is
considered to be the standard type of Rockwell indenter ball. Steel indenter balls may be continued to be used
if specified in a product specification, or by special agreement.
NOTE 1 Attention is drawn to the fact that results obtained with hardmetal balls can be significantly different than when
using a steel ball. For specific materials and/or products, other specific International Standards apply (for instance
ISO 3738-1 and ISO 4498-1).
NOTE 2 For certain materials, the fields of application may be narrower than those indicated.
In dieser Norm ist das Verfahren zur Härteprüfung nach Rockwell für metallische Werkstoffe festgelegt (Skalen und Anwendungsbereiche nach Tabelle 1). Für Sonder-Werkstoffe und/oder Erzeugnisse gelten besondere Normen (z. B. ISO 3738-1 und ISO 4498-1).
Ключевые слова:
Skala,Dokumentation,Stahl,Eisen,Metall,metallischer Werkstoff,Härteprüfung,Rockwell,Rockwell-Härteprüfung,Rockwellhärte,Prüfung,Prüfverfahren,Materialprüfung,Prüfeinrichtung,Prüfbericht,Bezeichnung,Abbildung,Messunsicherheit