(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 6789-2:2017-08
Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
Заменен
Печатная копияПечатное издание
167.04 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
25.140.30 Hand-operated. Including wrenches, screwdrivers, pliers, nippers, hammers, etc. / Инструменты, управляемые вручную. Включая гаечные ключи, отвертки, клещи, кусачки, молотки и т.д.
Описание
This document specifies the method for the calibration of hand torque tools and describes the method of calculation of measurement uncertainties for the calibration.
This document specifies the minimum requirements for the calibration of the torque measurement device where the relative measurement uncertainty interval, W´md, is not already provided by a traceable calibration certificate.
ISO 6789 is applicable for the step by step (static) and continuous (quasi-static) calibration of torque measurement devices, the torque of which is defined by measuring of the elastic form change of a deformable body or a measured variable which is in proportion to the torque.
This document applies to hand torque tools which are classified as indicating torque tools (Type I) and setting torque tools (Type II).
Dieses Dokument legt das Verfahren für die Kalibrierung von handbetätigten Drehmoment-Schraubwerkzeugen fest und beschreibt das Verfahren für die Berechnung von Messunsicherheiten für die Kalibrierung.
Dieses Dokument legt die Mindestanforderungen an die Kalibrierung der Drehmomentmesseinrichtung für den Fall fest, dass das Intervall der maximalen relativen Messunsicherheit W´md nicht bereits mit einem rückverfolgbaren Kalibrierschein dokumentiert wurde.
ISO 6789 gilt für die schrittweise (statische) und die kontinuierliche (quasi-statische) Kalibrierung von Drehmomentmesseinrichtungen, deren Drehmoment anhand der Messung der elastischen Formänderung eines verformbaren Körpers oder einer dem Drehmoment proportionalen gemessenen Variablen festgelegt wird.
Dieses Dokument gilt für die handbetätigten Drehmoment-Schraubwerkzeuge, welche als anzeigende Drehmoment-Schraubwerkzeuge (Typ I) und auslösende Drehmoment-Schraubwerkzeuge (Typ II) eingestuft sind.
Ключевые слова:
Schraubwerkzeug,handbetätigtes Drehmoment-Werkzeug,Prüfverfahren,Typprüfung,Annahmeprüfung,Mindestanforderung,Kalibrierung,Kalibrierscheine,Lagerung,Tribotechnik,Verzahnung,Werkzeugmaschine,Werkzeug,LTVW,Konformitätsprüfung,Drehmoment-Schraubwerkzeug,Kalibrierungstemperatur,Kalibrierungsanforderung,Kalibrierverfahren,Kalibrierfolge,Konformität,Drehmomentprüfung,handbetätigt,Handwerkzeug,Klassifikation,Klassifizierung,Toleranz (Mechanik),Drehmoment,Drehmomentschlüssel,manuell,Schraubenschlüssel,Vierkant,Kennzeichnung,Montage,Begriffe,Anforderung,Genauigkeit,Definition,Prüfung,mathematische Formel,Toleranz