(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 7662:1996-09
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988)
Действует
Печатная копияПечатное издание
89.76 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
23.040.70 Hoses and hose assemblies / Рукава и рукава в сборе
Описание
This International Standard specifies a method for determining
the abrasion of a hose lining when a certain amount of specified
grit is passed through the hose. The method is applicable to
rubber and plastics hoses with an internal bore of 20 to 50 mm
used for grit blasting, shot blasting and similar operations.
The method may be used for comparison of the abrasion
resistance of different types of hose, but not for specification of
maximum abrasion in a hose standard. Comparison should be
made on the same type and size of hose. Results from tests carried
out with different types of grit should not be compared.
Es wird ein Verfahren zur Bestimmung des Abriebes der Auskleidung eines Schlauches für den Fall festgelegt, daß eine bestimmte Menge eines bestimmten Kieses durch den Schlauch gegeben wird. Das Verfahren ist auf Gummi- und Kunststoffschläuche mit einer lichten Weite von 20 mm bis 50 mm anwendbar, die für Sandstrahlen, Strahlputzen mit Strahlsand und ähnliche Zwecke verwendet werden. Das Vefahren kann für den Vergleich der Abriebfestigkeit unterschiedlicher Schlaucharten verwendet werden.
Ключевые слова:
Schlauch, Gummischlauch, Prüfung, Prüfgerät, Prüfverfahren, Prüfbericht, Bestimmungsverfahren, Abbildung, Abrieb, Auskleidung, Abriebfestigkeit, Kunststoff