(812) 309-78-59
(495) 223-46-76
ONR CEN ISO/TS 16558-2:2015-12
Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015)
Действует
Печатная копияПечатное издание
175.43 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
13.080.10 Chemical characteristics of soils / Химические характеристики грунтов
Описание
This part of ISO 16558 specifies a method for the quantitative determination of the total extractable semi-volatile, aliphatic, and aromatic fractions of petroleum hydrocarbon content in field moist soil
samples by gas chromatography.
The results of the test carried out can be used for risk assessment studies related to contaminations with petroleum hydrocarbons.
This part of ISO 16558 provides a method applicable to petroleum hydrocarbon contents from about 100 mg/kg soil expressed as dry matter for the whole aliphatic fraction C10 to C40, as well as the aromatic fraction C10 to C40. For sub-fractions, lower limits of determination can be reached.
If lower detection limits are required, large volume injection can be used or concentration of the final extract can be carried out.
With this method, all hydrocarbons with a boiling range of 174 °C to 525 °C, n-alkanes between C10H22 to C40H82, isoalkanes, cycloalkanes, alkyl benzenes, and alkyl naphthalenes and polycyclic aromatic compounds are determined as total extractable semi-volatile petroleum hydrocarbons C10 to C40; besides that, semi-volatile aliphatic and aromatic fractions are specified.
For the determination of volatile aliphatic and aromatic fractions of petroleum hydrocarbons in soil samples, see ISO 16558-1.
On the basis of the peak pattern of the gas chromatogram and of the boiling points of the individual n-alkanes listed in Annex B, the approximate boiling range of the mineral oil and some qualitative information on the composition of the contamination can be achieved.
Dieser Teil von ISO 16558 legt ein Verfahren zur quantitativen Bestimmung des Gesamtgehalts an extrahierbaren schwerflüchtigen, aliphatischen und aromatischen Fraktionen des Mineralölkohlenwasserstoffs (Petroleum-Kohlenwasserstoff) in feldfrischen Bodenproben mittels Gaschromatographie fest.
Die Ergebnisse der durchgeführten Prüfung können für Studien zur Risikobeurteilung hinsichtlich der Kontaminationen mit Mineralölkohlenwasserstoffen angewendet werden.
Dieser Teil von ISO 16558 stellt ein Verfahren auf, das für Mineralölkohlenwasserstoff-Gehalte von etwa 100 mg/kg Boden, angegeben als Trockensubstanz (en: dry matter) für die gesamte aliphatische Fraktion C10 bis C40 sowie für die aromatische Fraktion von C10 bis C40 anwendbar ist. Bei Teilfraktionen können niedrigere Bestimmungsgrenzen erreicht werden.
Werden geringere Bestimmungsgrenzen gefordert, kann ein großes Injektionsvolumen verwendet oder die Konzentration des Endextraktes kann vorgenommen werden.
Mit diesem Verfahren werden alle Kohlenwasserstoffe mit einem Siedebereich von 174 °C bis 525 °C, n-Alkane zwischen C10H22 bis C40H82, Isoalkane, Cycloalkane, Alkylbenzole und Alkylnaphtaline und poly-cyclische aromatische Verbindungen als gesamte extrahierbare schwerflüchtige Mineralölkohlenwasser-stoffe C10 bis C40 bestimmt. Darüber hinaus werden schwerflüchtige aliphatische und aromatische Fraktionen festgelegt.
Hinsichtlich der Bestimmung leicht flüchtiger aliphatischer und aromatischer Fraktionen von Mineralölkohlenwasserstoffen in Bodenproben, siehe ISO 16558-1.
Auf der Grundlage der Peakfolge des Gaschromatogramms und der Siedepunkte der einzelnen im Anhang B angeführten n-Alkane können der näherungsweise Siedebereich des Mineralöls und einige qualitative Hinweise zur Zusammensetzung der Kontamination erhalten werden.
Ключевые слова:
Bodenbeschaffenheit, Mineralölkohlenwasserstoff, Risikobeurteilung, aliphatische Fraktion, aromatische Fraktion, schwerflüchtiger Mineralölkohlenwasserstoff, Gaschromatographie, Flammenionisationsdetektion, Petroleum-Kohlenwasserstoff, Mineralöl, Begriffe, Terminologie