(812) 309-78-59
(495) 223-46-76
ASTM C647-95(2000)
Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
6 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
91.100.60 Thermal and sound insulating materials / Тепло- и звукоизоляционные материалы
Сборник (ASTM):
04.06 Thermal Insulation; Building and Environmental Acoustics / Теплоизоляция; Внутренняя звукоизоляция зданий и звукоизоляция от внешней среды
Тематика:
Thermal Insulation
Описание
Значение и использование

Each of the properties listed should be considered in selecting materials for specific projects. A list of the selected properties with limiting values assigned will form a part of the product specification.

All of the properties may not be pertinent in any specific situation, and all of the tests outlined may not be required. A condition to any specification must be an evaluation of the proposed use to determine which properties may be required.

Membrane reinforcements are frequently specified and used with mastics and coatings. Service properties of such systems of finishes may be different from the unreinforced finishes; therefore, it is essential to test specimens of the reinforced system.

Область применения

1.1 This guide identifies properties of mastics and coating finishes characterizing their performance as finishes for thermal insulation.

1.2 These properties relate to application and service. Each property is defined, and its significance and suggested test methods are described.

1.3 The properties appear in the following order in this guide.

Paragraph
Application Properties6
Consistency6.1
Coverage6.2
Build6.3
Wet Flammability6.4
Toxicity6.5
Temperature and Humidity Range6.6
Surface Wetting and Adhesion6.7
Gap Filling and Bridging6.8
Sizing and Sealing6.9
Corrosion or Solvent Attack6.10
Drying Time and Curing Time6.11
Shrinkage6.12
Storage Stability6.13
Freeze-Thaw Stability6.14
Service Properties7
Specimen Preparation7.1
Outdoor Durability7.2
Environmental Resistance7.3
Temperature Limits7.3.1
Chemicals and Water Resistance7.3.2
Mold and Mildew Resistance7.3.3
Surface Flammability7.4
Water-Vapor Transmission Rate7.5
Adhesion7.6
Damage Resistance7.7
Impact Resistance7.7.1
Abrasion Resistance7.7.2
Stress Resistance7.8
Flexure7.8.1
Elongation7.8.2
Color7.9
Odor7.10
Other Properties8

1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Ключевые слова:
application properties; mastic coating; service properties