(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 18276:2006-09
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2005)
Заменен
Печатная копияПечатное издание
131.04 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
25.160.20 Welding. Including electrodes, filler metals, gases, etc. / Сварочные расходуемые материалы. Включая электроды, присадочные материалы, газы и т.д.
Описание
This International Standard specifies requirements for classification of tubular cored electrodes with or without
a gas shield for metal arc welding of high-strength steels in the as-welded condition or in the post-weld heattreated
condition with a minimum yield strength higher than 550 MPa or a minimum tensile strength higher
than 590 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if used
with more than one.
This document is a combined specification providing classification utilizing a system based upon the yield
strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the
tensile strength and an average impact energy of 27 J of the all-weld metal.
1) Subclauses and tables which carry the suffix letter A are applicable only to tubular cored electrodes
classified under the system based upon the yield strength and an average impact energy of 47 J of
the all-weld metal given in this International Standard.
2) Subclauses and tables which carry the suffix letter B are applicable only to tubular cored electrodes
classified under the system based upon the tensile strength and an average impact energy of 27 J of
the all-weld metal given in this International Standard.
3) Subclauses and tables which do not have either the suffix letter A or the suffix letter ¿B¿ are
applicable to all tubular cored electrodes classified under this International Standard.
It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of
pulsed current but, for the purposes of this International Standard, pulsed current is not used for determining
the electrode classification.
Diese Internationale Norm legt Anforderungen fest für die Einteilung von Fülldrahtelektroden zum Metall-Lichtbogenschweißen von hochfesten Stählen mit oder ohne Gasschutz mit einer Mindeststreckgrenze über 550 MPa oder einer Mindestzugfestigkeit über 590 MPa im Schweißzustand oder nach einer Wärmenachbehandlung. Eine Fülldrahtelektrode kann mit verschiedenen Schutzgasen geprüft und eingeteilt werden, falls sie mit mehr als einem Schutzgas angewendet wird. Dieses Dokument enthält gemeinsame Anforderungen zur Einteilung des reinen Schweißgutes entweder nach der Streckgrenze und der durchschnittlichen Kerbschlagarbeit von 47 J oder nach der Zugfestigkeit und der durchschnittlichen Kerbschlagarbeit von 27 J.
Ключевые слова:
Metall,Metallschutzgasschweißen,Elektrode,Drahtelektrode,Schweißen,Schweißtechnik,Schweißzusatz,Fülldrahtelektrode,Schutzgasschweißen,hochfester Stahl,Einteilung,Eigenschaft,Kennzeichen,Kurzzeichen,Bezeichnung,Schweißgut,chemische Zusammensetzung,Verarbeitung,Prüfung,Materialprüfung