Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM D6144-12

Заменен
Standard Test Method for Analysis of AMS (α;-Methylstyrene) by Capillary Gas Chromatography — 5 стр.
Значение и использование

5.1 This test method is suitable for setting specifications on the materials referenced in 1.2 and for use as an internal quality control tool where AMS is produced or is used in a manufacturing process. It may also be used in development or research work involving AMS.

5.2 This test method is useful in determining the purity of AMS with normal impurities present. If extremely high boiling or unusual impurities are present in the AMS, this test method would not necessarily detect them and the purity calculation would be erroneous.

Область применения

1.1 This test method covers the determination of the purity of AMS (α-methylstyrene) by gas chromatography. Calibration of the gas chromatography system is done by the external standard calibration technique.

1.2 This test method has been found applicable to the measurement of impurities such as cumene, 3-methyl-2-cyclopentene-1-one, n-propylbenzene, tert-butylbenzene, sec-butylbenzene, cis-2-phenyl-2-butene, acetophenone, 1-phenyl-1-butene, 2-phenyl-2-propanol, trans-2-phenyl-2-butene, m-cymene, p-cymene, and phenol, which are common to the manufacturing process of AMS. The method has also been found applicable for the determination of para-tertiary-butylcatechol typically added as a stabilizer to AMS. The impurities in AMS can be analyzed over a range of 5 to 800 mg/kg by this method. (See Table 1.) The limit of detection for these impurities is typically in the range of 5 to 10 mg/kg. (See Table 1.)

TABLE 1 Summary of Precision Data (mg/kg)

Compound

Repeatability (r)

Reproducibility (R)

Range Studied

 

 

 

 

Acetone

1.61 + 0.035*Acetone

0.47 + 1.10*Acetone

0.5 – 26

Cumene

−0.46 + 0.031*Cumene

7.88 + 0.19*Cumene

45 – 290

nPropylbenzene (NPB)

2.11 + 0.03*NPB

−7.81 + 0.37*NPB

55 – 195

Phenol

1.84

3.65 + 0.58*Phenol

1 – 40

tertButylbenzene (TBB)

−1.22 + 0.035*TBB

3.63 + 0.087*TBB

150 – 650

secButylbenzene (SBB)

4.23 + 0.019*SBB

21.60 + 0.25*SBB

200 – 765

mCymene

0.31 + 0.035*mCymene

2.34 + 0.35*mCymene

2 – 50

oCymene

1.63

8.00

29 – 31

pCymene

5.12

15.79

10 – 18

cis-2-Phenyl-2-Butene (CPB)

0.17 + 0.030*CPB

5.39 + 0.11*CPB

50 – 225

trans-2-Phenyl-2-Butene (TPB)

1.57

0.54 + 0.20*TPB

19 – 70

1-Phenyl-1-Butene (PB)

4.00 + 0.018*PB

0.17 + 0.19*PB

0.2 – 735

Acetophenone (AP)

–1.09 + 0.15*AP

1.17 + 0.63*AP

15 – 115

para-tert-Butylcatechol (PTBC)

2.21

17.82

10 – 19

2-Methylbenzofuran (MBF)

0.33 + 0.76*MBF

0.75 + 0.60*MBF

1 – 2

2-Phenylpropion aldehyde (PPA)

0.59 + 0.11*PPA

0.29 + 0.23*PPA

1.5 – 15

α-Methylstyrene Oxide (AMSO)

4.61

6.51 + 0.23*AMSO

13 – 32

DimethylBenzyl Alcohol (DMBA)

0.38

0.55 + 2.03*DMBA

0.1 – 1

 

 

 

 


1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.

ICS
71.040.50 Physicochemical. Including spectrophotometric and chromatographic analysis / Физико-химические методы анализа. Включая спектрофотометрический и хроматографический анализы
Сборник ASTM
06.04 Paint—Solvents; Aromatic; Industrial, Specialty and Related Chemicals / Красители – Растворители; Ароматические углеводороды
Тематика
Chemicals: Paint & Coatings