(812) 309-78-59
(495) 223-46-76
ASTM A915/A915M-08(2013)
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
3 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.140.85 Iron and steel forgings / Чугунные и стальные поковки
Сборник (ASTM):
01.02 Ferrous Castings; Ferroalloys / Стальное литье, Ферросплавы
Тематика:
Steel--Structural, Tubes, Plate, Coated
Описание
Реферат

This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades. Several grades are covered, such as; SC 1020, SC 1025, SC 1030, SC 1040, SC 1045, SC 4130, SC 4140, SC 4330, SC 4340, SC 8620, SC 8625, and SC 8630. Castings shall be heat treated either by full annealing, normalizing, normalizing and tempering, or quenching and tempering. The steel shall conform to the requirements of chemical composition as specified.

Область применения

1.1 This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades.

1.2 Several grades are covered and are designated by chemical composition shown in Table 1.

TABLE 1 Chemical Composition (weight, percent)

Grade

C

Mn

P, max

S, max

Si

Ni

Cr

Mo

 

SC 1020
 (J02003)

0.18/0.23

0.40/0.80

0.040

0.040

0.30/0.60

. . .

. . .

. . .

SC 1025
 (J02508)

0.22/0.28

0.40/0.80

0.040

0.040

0.30/0.60

. . .

. . .

. . .

SC 1030
 (J03012)

0.28/0.34

0.50/0.90

0.040

0.040

0.30/0.60

. . .

. . .

. . .

SC 1040
 (J04003)

0.37/0.44

0.50/0.90

0.040

0.040

0.30/0.60

. . .

. . .

. . .

SC 1045
 (J04502)

0.43/0.50

0.50/0.90

0.040

0.040

0.30/0.60

. . .

. . .

. . .

SC 4130
 (J13502)

0.28/0.33

0.40/0.80

0.035

0.040

0.30/0.60

. . .

0.80/1.10

0.15/0.25

SC 4140
 (J14045)

0.38/0.43

0.70/1.10

0.035

0.040

0.30/0.60

. . .

0.80/1.10

0.15/0.25

SC 4330
 (J23259)

0.28/0.33

0.60/0.90

0.035

0.040

0.30/0.60

1.65/2.00

0.70/0.90

0.20/0.30

SC 4340
 (J24053)

0.38/0.43

0.60/0.90

0.035

0.040

0.30/0.60

1.65/2.00

0.70/0.90

0.20/0.30

SC 8620
 (J12095)

0.18/0.23

0.60/1.00

0.035

0.040

0.30/0.60

0.40/0.70

0.40/0.60

0.15/0.25

SC 8625
 (J12595)

0.23/0.28

0.60/1.00

0.035

0.040

0.30/0.60

0.40/0.70

0.40/0.60

0.15/0.25

SC 8630
 (J13095)

0.28/0.33

0.60/1.00

0.035

0.040

0.30/0.60

0.40/0.70

0.40/0.60

0.15/0.25


1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1 Within the text, the SI units are shown in brackets.

1.3.2 Inch-pound units are applicable for material ordered to Specification A915 and SI units for material ordered to Specification A915M.

Ключевые слова:
alloy steel; carbon steel; steel castings