Formerly under the jurisdiction of Committee C03 on Chemical-Resistant Nonmetallic Materials, this specification was withdrawn in January 2021 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
РефератThis specification covers the requirements for chemical-resistant resin grouts used for filling joints of chemical-resistant brick or tile units. The liquid resins may be furan, epoxy, vinyl ester, or other resins capable of forming chemical-resistant grout after mixing with a suitable setting agent and filler. Fillers may be silica, carbon, or other chemical resistant materials and may be supplied as a separate component or as a premix with the liquid resin and/or setting agent. Setting agents may include amines, polyamides, acids, or other reactants and may be supplied as a separate component or as a constituent of the filler. All materials should conform to the prescribed setting time, compressive strength, tensile strength, water absorption and linear shrinkage.
Область применения1.1 This specification covers the requirements for chemical-resistant resin grouts for filling joints of chemical-resistant brick or tile units. For use of these materials, see Practice C723. (For mortars, see Specification C395.)
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.