(812) 309-78-59
(495) 223-46-76
ÖNORM EN 1487:2000-07
Building valves - Hydraulic safety groups - Tests and requirements
Заменен
Печатная копияПечатное издание
112.56 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
91.140.60 Water. Including water meters in buildings / Системы водоснабжения. Включая счетчики воды в зданиях
Описание
This European Standard specifies, dimensions, materials and performance requirements (including methods of test) for hydraulic safety groups, of nominal sizes from DN 15 to DN 40, having working
pressures from 0,1 MPa (l bar) to 0,7 MPa (7 bar). Hydraulic safety groups are intended for fitting to the cold water supply of storage water heaters, having a maximum distribution temperature of
95C, for all energy sources. Hydraulic safety groups control and limit the pressure in hot water heaters and prevent, by one function, the backflow of warm water into the circuit, and the contamination of water in the water heaters by the discharged water.
Hydraulic safety groups do not control the temperature but alone may ascertain the hydraulic safety of water heaters if the mechanical resistance of the water heater remains at least equal to the rating
pressure. NOTE : The use of the device specified in this Standard does not override the need to use controls (eg thermostats and cut-outs) which act directly on the power sources of water heaters.
Diese Norm legt die Anforderungen an Sicherheitsgruppen von Speicherwassererwärmern bezüglich Werkstoff, Oberflächenbeschaffenheit, Abmessungen, hydraulischer und mechanischer Eigenschaften sowie deren Prüfung und Kennzeichnung fest.
Ключевые слова:
Gebäude,Armatur,Sanitärarmatur,Werkstoff,Abmessung,Prüfung,Prüfverfahren,Begriffe,Terminologie,Abbildung,Anschluß,Bezeichnung,Sicherheitsanforderung,Dichtheit,Gebäudearmatur,hydraulisch,Sicherheit,Sicherheitsgruppe,Bauwesen,Oberfläche,Konstruktion,Verbindung,Druck,Durchfluss,Klassifizierung,Kennzeichnung,Wassererwärmer,Kaltwasser,Speicher