(812) 309-78-59
(495) 223-46-76
ÖNORM EN 16254:2013-12
Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
Заменен
Печатная копияПечатное издание
86.64 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
83.180 Adhesives. Including adhesive tapes / Клеи. Включая клейкие ленты
Описание
This European Standard establishes a classification for emulsion polymerised isocyanate (EPI) adhesives according to their suitability for use in load-bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the industrial manufacture of load-bearing timber structures only.
The performance requirements of this standard apply to the adhesive only, not to the structure.
This European Standard is primarily intended for the use of adhesive manufacturers and for the use in timber structures bonded with adhesives, to assess or control the quality of adhesives. This European Standard only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions.
Such an adhesive meeting the requirements of this European Standard for its type is adequate for use in a load-bearing timber structure, provided that the bonding process has been carried out according to an appropriate product standard.
Diese Europäische Norm stellt ein Klassifizierungssystem für Klebstoffe aus emulsionspolymerisiertem
Isocyanat (EPI) entsprechend ihrer Eignung zur Verwendung für tragende Holzbauteile auf, die unter
bestimmten Klimabedingungen zum Einsatz kommen und legt die Leistungsanforderungen für derartige
Klebstoffe ausschließlich zur industriellen Herstellung von tragenden Holzbauteilen fest.
Die Leistungsanforderungen dieser Norm gelten nur für den Klebstoff, nicht für das Bauteil.
Diese Europäische Norm ist in erster Linie für den Gebrauch durch die Hersteller der Klebstoffe und der
verklebten Holzbauteile bestimmt, um die Qualität von Klebstoffen zu beurteilen oder zu überprüfen. Diese
Europäische Norm legt nur die Leistungsanforderungen an einen Klebstoff fest, der in einer Umgebung
Verwendung findet, die den festgelegten Bedingungen entspricht.
Ein den Anforderungen dieser Europäischen Norm entsprechender Klebstoff ist für die Verwendung in einem
tragenden Holzbauteil geeignet, sofern der Verklebungsvorgang nach einer entsprechenden Produktnorm
ausgeführt wurde.
Ключевые слова:
Klebstoff,Emulsionspolymerisiertes Isocyanat,tragende Holzbauteile,Klassifizierung,Leistungsanforderung,Begriffe,Terminologie,Prüfverfahren,Klimatisierung,Scherprüfung,Brettschichtholz,Produktionskontrolle,Klebstofftypen