Metallic materials - Tube - Ring tensile test (ISO 8496:1998)
Заменен
Печатная копияПечатное издание
44.04 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
77.040.10 Mechanical testing of metals / Механические испытания металлов, 77.140.75 Steel. Including hollow steel bars and sections for construction / Стальные трубы и трубки специального назначения. Включая полые стальные цилиндрические заготовки и профили
Описание
This International Standard specifies a method for a ring tensile test of tubes to reveal surface and internal defects by subjecting the test piece to strain until fracture occurs. This test may also be used to assess the ductility of tubes. The ring tensile test is applicable to tubes having an outside diameter exceeding 150 mm and a wall thickness no greater than 40 mm. The inside diameter shall be greater than 100 mm. 2 Principle Subjecting a ring cut from the end of a tube to strain in the circumferential direction until fracture occurs. 3 Apparatus 3.1 Two circular pins, of equal diameter with parallel axes, and movable in relation to each other while still remaining parallel. In principle, the diameter of the pins shall be the minimum permissible from strength considerations but, provided that the inside diameter of the tube allows, should be at least 3 times the wall thickness of the tube to be tested (see figure 1). In dieser Internationalen Norm ist der Ringzugversuch für Rohre festgelegt. Er dient der Feststellung von Oberflächen- und Innenfehlern durch eine Beanspruchung einer Probe bis zum Bruch. Er darf auch zur Bestimmung der Umformbarkeit von Rohren angewandt werden. Der Ringzugversuch ist anwendbar auf Rohre mit einem Außendurchmesser über 150 mm und Wanddicken nicht größer als 40 mm. Der Innendurchmesser muss größer als 100 mm sein.