(812) 309-78-59
(495) 223-46-76
ASTM B432-04
Standard Specification for Copper and Copper Alloy Clad Steel Plate
6 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
Сборник (ASTM):
02.01 Copper and Copper Alloys / Медь и сплавы из меди
Тематика:
Copper
Описание
Реферат

This specification covers plates made of carbon steel or low-alloy steel base, to which a layer of copper or copper-base alloy cladding is integrally and continuously bonded on one or both sides. The material is generally intended for pressure vessel applications, but may be used in other structural applications where corrosion resistance or conductivity of the alloy is of prime importance. The steel shall be primarily made by the open-hearth, electric-furnace (with optional degassing and refining done separately), or basic-oxygen processes. Secondary processes may also be performed, whereby the steel made from the primary processes is remelted using, but not limited to, electroslag remelting or vacuum arc remelting. Materials shall be tested and shall conform to dimensional (thickness, flatness, and outside diameter), mechanical (tensile, shear and bond strengths), and chemical composition requirements. The manufacturer may rework defects in the cladding by repair welding provided specific requirements are met.

Область применения

1.1 This specification covers plate of a carbon steel or low-alloy steel base to which is integrally and continuously bonded on one or both sides a layer of copper or copper-base alloy. The material is generally intended for pressure vessel use but may be used in other structural applications where corrosion resistance or conductivity of the alloy is of prime importance.

1.2 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

Ключевые слова:
bond strength; clad; cladding; clad steel plate; copper; copper-base alloy; steel