(812) 309-78-59
(495) 223-46-76
ASTM D3374/D3374M-14
Standard Specification for Vinyl-Coated Glass Yarns (Withdrawn 2023)
5 стр.
Отменен
Электронный (pdf)Печатное издание
106.08 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
59.080.40 Coated fabrics / Ткани с покрытием
Сборник (ASTM):
07.01 Textiles (I): D76–D4391 / Текстиль (I): D76-D4391
Тематика:
Textiles
Описание
Причина отменыThis specification covers vinyl-coated glass yarns. These yarns are manufactured in two basic classes. These classes have been established that when properly woven into screening, satisfactory strength, durability, and insect protection are obtained. The two classes are as follows:

Class 1—Nominal thickness 0.292 mm [0.0115 in.].

Class 2—Nominal thickness 0.330 mm [0.0130 in.].

Formerly under the jurisdiction of Committee D13 on Textiles, this specification was withdrawn in January 2023 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Область применения

1.1 This specification covers vinyl-coated glass yarns. These yarns are manufactured in two basic classes. These classes have been established that when properly woven into screening, satisfactory strength, durability, and insect protection are obtained. The two classes are as follows:

1.1.1 Class 1—Nominal thickness 0.292 mm [0.0115 in.].

1.1.2 Class 2—Nominal thickness 0.330 mm [0.0130 in.].

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 The following precautionary statement pertains only to the test method portions, Sections 12–21, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
appearance; breaking force; color; colorfastness; flexibility; ignition loss; thickness; vinyl-coated glass yarns; yarn number