(812) 309-78-59
(495) 223-46-76
ASTM D6703-07
Standard Test Method for Automated Heithaus Titrimetry
9 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
17.060 Measurement. Including measuring instruments / Измерение объема, массы, плотности, вязкости. Включая измерительные приборы
Сборник (ASTM):
04.03 Road and Paving Materials; Vehicle–Pavement Systems / Материалы для покрытия и мощения дорог, Дорожно-транспортные системы
Тематика:
Road & Paving
Описание
Значение и использование

This test method is intended primarily as a laboratory diagnostic tool for estimating the colloidal stability of asphalt, asphalt cross blends, aged asphalt, pyrolyzed asphalt, and heavy oil residuum. Historically, asphalt and heavy oil residua have been modeled as colloidal suspensions (8,9) in which a polar, associated asphaltene moiety (the dispersed phase) is suspended in a maltene solvent moiety (the dispersing medium) (refer to test methods D 3279, D 4124, and D 5546 for further definition of asphalt fraction materials). The extent to which these two moieties remain in a given state of peptization is a measure of the compatibility of the suspension. Compatibility influences important physical properties of these materials, including rheological properties, for example, phase angle and viscosity (10,11). Compatibility also influences coke formation in refining processes (4). This test method and other similar test methods (7, 12-15), along with the classical Heithaus test (1,2), measures the overall compatibility of a colloidal system by determining a designated parameter referred to as the state of peptization, P. The value of P commonly varies between 2.5 and 10 for unmodified or neat asphalts. Materials calculated to have low values of P are designated as incompatible, where as materials calculated to have high P values are designated as compatible. Values of P may be calculated as a function of two other designated parameters that relate to the peptizability of the asphaltene moiety (the asphaltene peptizability parameter, pa) and the solvent power of the maltene moiety (the maltene peptizing power parameter, po). Values of pa and po are calculated as functions of the quantities Cmin and FRmax, the values of which are obtained from three experimental variables, the weight of residuum or asphalt (Wa), the volume of solvent (VS), and the volume of titrant added up to the flocculation point (VT).

Область применения

1.1 This test method describes a procedure for quantifying three Heithaus compatibility parameters (1,2) that estimate the colloidal stability of asphalts and asphalt cross blends (1,2), aged asphalts (3), and pyrolyzed heavy oil residua and asphalt (4) using automated Heithaus titrimetry as a stability diagnostic tool.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
sphalt; bitumen; coke; colloidal stability; compatibility; heavy oil residua; Asphalts; Colloidal stability; Compatibility; Heavy oil residua; Heithaus titrimetry