5.1 This test method is designed specifically for emulsions of pesticide emulsifiable concentrates.

5.2 This test method provides information on the absorption/adsorption of solvents by simulated organic soil and inorganic soil impacted by pesticide EC emulsion applications.

5.3 The amount of solvent lost by volatilization at 40ºC as determined by this method is an indirect measure of the atmospheric availability of the solvent to potentially react with nitrogen oxides to form tropospheric ozone, a major air pollutant.

1.1 This test method simulates the application of an emulsion of a pesticide emulsifiable concentrate (EC) to soil with high organic matter (corn cob granules) and to soil with high inorganic matter (clay granules) and determines the amount of solvent retained by the granules, and withheld from the atmosphere, before and after exposure to 40ºC in a vented oven. The granules simulate two extremes of soil composition, and the 40ºC exposure simulates high temperature weathering. Solvent loss from organic substrates other than corn cob may also be determined by repeating the 40°C exposure tests with the chosen substrate replacing corn cob. The results with corn cob, however, are a reference that must be reported with the alternate substrate results. The difference in solvent content of the granules before and after weathering is an indication of the emission of the solvent from soil impacted by emulsions or solutions during pesticide applications using common practices such as spraying and drip irrigating. Analysis of the granules for solvent content is by high pressure liquid chromatography (HPLC), gas chromatography (GC), or other methods tested and proven to be accurate and reproducible.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.