Причина отменыThis practice describes a method for creating test targets containing varying percentages of area coverage for use in determining the yield of the supplies used by liquid and solid ink jet printers.

Formerly under the jurisdiction of Committee F05 on Business Imaging Products, this practice was withdrawn in May 2016 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

Test targets where the percentage of area coverage has been predetermined are not readily available from commercial sources. Moreover, it is beyond the ability of most users to verify if indeed, the commercially-available test targets contain the advertised area coverage. This procedure allows the user to easily create test targets, using commercially available PC software, which can be easily verified for percentage of area coverage and can provide reproducible interlaboratory results.

Область применения

1.1 This practice describes a method for creating test targets containing varying percentages of area coverage for use in determining the yield of the supplies used by liquid and solid ink jet printers.

1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine limitations prior to use.