(812) 309-78-59
(495) 223-46-76
ASTM F716-09
Standard Test Methods for Sorbent Performance of Absorbents (Withdrawn 2018)
6 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
71.040.30 Chemical. Including reference materials / Химические реактивы. Включая эталонные материалы
Сборник (ASTM):
11.08 Pesticides, Antimicrobials, and Alternative Control Agents; Hazardous Substances and Oil Spill Response / Пестициды, противомикробные препараты и альтернативные средства контроля; Влияние опасных веществ и разлива нефти
Тематика:
Environmental Toxicology
Описание
Причина отменыThese test methods cover the development of laboratory test data which describe the performance of absorbent materials used to remove oils and other compatible fluids from water.

Formerly under the jurisdiction of Committee F20 on Hazardous Substances and Oil Spill Response, these test methods were withdrawn in July 2018 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

These methods are to be used as a basis for comparison of absorbents in a consistent manner.

These tests are not appropriate for adsorbent materials which are covered in Test Method F726.

These methods are not useful for a comparison of absorbents with adsorbents, even though all absorbents exhibit adsorbent properties. Both types of materials have prime areas of utility.

These methods may not list all the safety and disposal options necessary for safe ultimate disposal of used sorbent material into the environment. Federal, state, and local regulatory rules must be followed.

Область применения

1.1 These test methods cover the development of laboratory test data which describe the performance of absorbent materials used to remove oils and other compatible fluids from water.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. (For a specific warning statement see 10.4.)

Ключевые слова:
absorbents; adsorbents; oil; sorbent; sorbent performance; Absorbent materials/applications; Absorption; Buoyancy; Exterior exposure tests; Oil absorption; Penetration; Performance--oil spill control materials/systems; Release rates; Sorbents; Strength; Water analysis