(812) 309-78-59
(495) 223-46-76
ÖNORM EN 1806:2006-11
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
Действует
Печатная копияПечатное издание
255.53 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
91.060.40 Chimneys,. Including flues and flue pipes / Дымовые трубы, шахты, каналы. Включая дымоходы и вытяжные трубы91.100.25 Terracotta. Including roofing tiles, bricks, etc. / Керамические изделия для строительства. Включая керамическую плитку, кровельную черепицу и т.д.
Описание
This European Standard specifies the requirements for clay/ceramic flue blocks with solid walls or walls with
vertical perforations including bonding and non-bonding blocks and their fittings. Non-bonding flue blocks which
have insulation in the vertical perforations or attached to the outer walls are also covered by this standard. This
standard specifies the performance requirements for factory-made flue blocks.
When they are installed, they will form a part of a multi-wall chimney or a complete chimney which will serve to
convey products of combustion from fireplaces or heating appliances to the atmosphere.
This standard includes components used for domestic and industrial chimneys which are not structurally
independent (free-standing). Testing, marking and inspection requirements are covered by this standard.
NOTE 1 Flue blocks covered by this standard are manufactured in three forms :
a) single flue ;
b) multi-flue ;
c) flue/ventilation combination.
NOTE 2 Flue blocks may have flues which are either circular, square or rectangular. The joints may have a locating feature
such as a rebate.
Diese Europäische Norm legt die Anforderungen für Keramik-Formblöcke mit massiven oder vertikal gelochten Wandungen einschließlich eingebundener oder nicht eingebundener Formblöcke und deren Formstücke fest. Nicht eingebundene Formblöcke mit einer Dämmung in der vertikal gelochten Wandung oder an den Außenwänden werden ebenfalls in dieser Norm berücksichtigt. Diese Norm legt die Leistungsanforderungen für werkmäßig hergestellte Formblöcke fest. Nach ihrem Einbau bilden die Formblöcke eine einschalige Abgasanlage, welche zur Ableitung von Ver-brennungsprodukten von Feuerstätten an die Außenluft bei Unter- druck verwendet wird. Diese Norm beinhaltet Bauteile für Haus- und industrielle Abgasanlagen, die nicht freistehend sind. Sie enthält ferner Anforderungen an die Prüfung, Kennzeichnung und Qualitäts- kontrolle.
Ключевые слова:
Keramik, Bauwesen, Abgasfang, Typprüfung, Begriffe, Terminologie, Abgas, Abgasanlage, Fang, Keramik-Block, Keramik-Formblock, einschalige Abgasanlage, Prüfmethode, Formblock, Formstück, Bauteil, Industrieanlage, Hausanlage, Prüfung, Konformitätsverfahren, Qualitätskontrolle, Produkt, Außenwand, Abbildung, Klassifizierung, Gebrauchsbedingung, Luftdruck, Leckrate, CE-Kennzeichnung, Werkstoff, Dämmung, Prüflast, Gasdichtheit, thermische Prüfung, Wasseraufnahme, Rohdichte, Wärmedurchlasswiderstand, Feuerwiderstand, Konformität, Probenahme, Probenahmeverfahren, Probenahmeplan, Qualitätssicherung, Prüfverfahren, Abmessung, Prüfkörper, Prüfeinrichtung, Dämmstoff, Adhäsion, Bezeichnung, Kennzeichnung, Überwachung, Berechnung, Näherung, CE-Zeichen, Zertifizierung, tongebundener Formstoff, Wandung, Wartung, Produktionskontrolle, Beschriftung, Annahme, Eigenschaft, Dichtheit, Dichtheitsprüfung, einschalig, einwandig, gasdicht, Hausschornstein, Keramikerzeugnis, Säurebeständigkeit, Schornstein