The present document specifies the technical requirements to be met by terminal equipment capable of connecting to a public telecommunications network and that support the GSM High Speed Circuit Switched Data Multislot (HSCSD) feature. These requirements apply to terminals for Phase 2+ of the public land mobile radio service, operating in the 900 MHz and 1800 MHz bands with a channel separation of 200 kHz, utilising constant envelope modulation and
carrying traffic channels according to the Time Division Multiple Access (TDMA) principle. The present document specifies the terminal equipment HSCSD requirements for the GSM 900 and the DCS 1800
versions of the Global System for Mobile communications (GSM).
The present document applies in addition to any regulatory requirements, eg. CTR 19/CTR 31, for HSCSD terminal equipment, Access. For each test purpose and its corresponding conformance requirement, a reference is given to the test method in
EN 300 607-1 (GSM 11.10-1) [2]. The requirements apply at the air interface and the Subscriber Identity Module - Mobile Equipment interface for the access requirements, which may be stimulated to perform the tests by additional equipment if necessary.
The measurement uncertainty is described in EN 300 607-1 (GSM 11.10-1) [2]. The present document covers the essential requirements of the Terminal Directive 98/13/EC [1] Articles 5d, 5e, 5f.
The Terminal Directive 98/13/EC [1] Articles 5a and 5b are covered by other directives, and, therefore, not by the present document. In the present document, there are no Electromagnetic Compatibility technical requirements in terms of the Terminal Directive 98/18/EC [1], Article 5c.
NOTE 1: Technical Requirements for EMC performance and testing of the equipment are covered by the relevant standards applicable to the EMC Directive 89/336/EEC, annex A. The present document specifies the HSCSD Terminal equipment additional requirements, Acce (...abbreviated)