(812) 309-78-59
(495) 223-46-76
ASTM D2427-06(2015)
Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
7 стр.
Заменен
Электронный (pdf)Печатное издание
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
75.160.20 Liquid. Including gasoline, diesel, kerosene, etc. / Жидкое топливо
Сборник (ASTM):
05.01 Petroleum Products, Liquid Fuels, and Lubricants (I): C1234–D3709 / Нефтепродукты, жидкое топливо и смазочные материалы (I): C1234–D3709
Тематика:
Petroleum
Описание
Значение и использование

4.1 In hydrocarbon type analyses of gasolines, highly volatile fuels can need to be stabilized by depentanization (Test Method D2001) prior to analysis. A knowledge of the composition of light hydrocarbons in the overhead from the depentanization process is useful in converting analyses of the depentanized fraction to a total sample basis.

Область применения

1.1 This test method covers the determination of the two (C2) through five(C5-) carbon paraffins and mono-olefins in gasolines. The concentrations by volume or mass (weight) of the following components are generally reported:

1.1.1 Ethylene plus ethane

1.1.2 Propane

1.1.3 Propylene

1.1.4 Isobutane

1.1.5 n-Butane

1.1.6 Butene-1 plus isobutylene

1.1.7 trans-Butene-2

1.1.8 cis-Butene-2

1.1.9 Isopentane

1.1.10 3-Methylbutene-1

1.1.11 n-Pentane

1.1.12 Pentene-1

1.1.13 2-Methylbutene-1

1.1.14 trans-Pentene-2

1.1.15 cis-Pentene-2

1.1.16 2-Methylbutene-2

1.2 This test method does not cover the determination of cyclic olefins, diolefins, or acetylenes. These are usually minor components in finished gasolines.

1.3 Samples to be analyzed should not contain significant amounts of material boiling lower than ethylene.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4.1 Exception—Alternative units, in common usage, are also provided to improve the clarity and aid the user of this test method.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
C2 to C5 hydrocarbons; gas chromatography; gasoline;