(812) 309-78-59
(495) 223-46-76
ASTM E2371-04
Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry (Withdrawn 2013)
13 стр.
Заменен
Электронный (pdf)Печатное издание
104.52 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
71.040.50 Physicochemical. Including spectrophotometric and chromatographic analysis / Физико-химические методы анализа. Включая спектрофотометрический и хроматографический анализы77.120.50 Titanium and titanium alloys / Титан и титановые сплавы
Сборник (ASTM):
03.05 Analytical Chemistry for Metals, Ores, and Related Materials / Аналитическая химия для металлов, руд и сопутствующих материалов: с E32 и далее
Тематика:
Analytical Chemistry
Описание
Причина отмены

Formerly under the jurisdiction of Committee E01 on Analytical Chemistry for Metals, Ores, and Related Materials, this test method was withdrawn in January 2013 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

This method for the chemical analysis of titanium and titanium alloys is primarily intended to test material for compliance with specifications of chemical composition.

It is assumed that all who use this method will be trained analysts capable of performing common laboratory procedures skillfully and safely, and that the work will be performed in a properly equipped laboratory.

The method is designed to give the maximum flexibility analyzing elements in the titanium matrix. Thus options are given in calibration and analysis to accommodate the variety of ICP and DCP spectrometers and their auxiliary systems.

Область применения

1.1 This method describes the analysis of titanium and titanium alloys by ICP-AES (Inductively Coupled Plasma) and DCP-AES (Direct Current Plasma) for the following elements:

ElementApplicationRange (wt.%)QuantitativeRange (wt.%)
Aluminum0-80.001 to 8.0
Boron0-0.040.0008 to 0.01
Chromium0-50.005 to 4.0
Copper0-0.60.002 to 0.5
Iron0-30.004 to 3.0
Manganese0-0.040.001 to 0.01
Molybdenum0-80.004 to 6.0
Nickel0-10.001 to 1.0
Silicon0-0.50.02 to 0.4
Tin0-40.02 to 3.0
Vanadium0-150.01 to 15.0
Yttrium0-0.040.001 to 0.004
Zirconium0-50.003 to 4.0

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazards statements are given in Section 9.

Ключевые слова:
atomic emission spectrometry; DCP; direct current plasma; ICP; inductively coupled plasma; titanium; titanium alloys