(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 8675:2013-04
Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
Действует
Печатная копияПечатное издание
114.98 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
21.060.20 Nuts / Гайки
Описание
This International Standard specifies the characteristics of hexagon thin nuts (chamfered), with metric fine pitch
thread, with nominal thread diameters, D, from 8 mm up to and including 64 mm, with product grade A for sizes
D of maximum 16 mm and product grade B for sizes D > 16 mm.
If, in special cases, specifications other than those listed in this International Standard are required, they can
be selected from existing International Standards, for example ISO 724, ISO 898-2, ISO 965-1, ISO 3506-2
and ISO 4759-1.
Coarse thread hexagon nuts according to ISO 4035 are intended to be the first choice.
Diese Internationale Norm legt Eigenschaften von niedrigen Sechskantmuttern (mit Fase) mit metrischem
Feingewinde mit Gewindenenndurchmessern D von 8 mm bis 64 mm fest. Für die Gewindenenndurchmesser
D kleiner gleich 16 mm gilt Produktklasse A und für die Gewindenenndurchmesser D > 16 mm Produktklasse B.
Falls in besonderen Fällen andere Festlegungen als die in dieser Internationalen Norm aufgeführten benötigt
werden, können diese den entsprechenden Internationalen Normen entnommen werden, z. B. ISO 724,
ISO 898-2, ISO 965-1, ISO 3506-2 und ISO 4759-1.
Sechskantmuttern mit Regelgewinde nach ISO 4035 sollten bevorzugt werden.
Ключевые слова:
Mechanische Verbindungselemente, Niedrige Sechskantmuttern, metrischem Feingewinde, Produktklasse A, Produktklasse B, Eigenschaft, Maße, technische Lieferbedingung