Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM A653/A653M-09

Заменен
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process — 13 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM A924/A924M-09
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 11 стр.
ASTM D7396-08
Заменен
Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting — 4 стр.
ASTM A370-09ae1
Заменен
Standard Test Methods and Definitions for Mechanical Testing of Steel Products — 47 стр.
ASTM A568/A568M-09
Заменен
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for — 28 стр.
ASTM A90/A90M-09
Заменен
Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings — 5 стр.
ASTM A902-09
Заменен
Standard Terminology Relating to Metallic Coated Steel Products — 7 стр.
ASTM E517-00(2006)e1
Заменен
Standard Test Method for Plastic Strain Ratio r for Sheet Metal — 8 стр.
ASTM E646-07
Заменен
Standard Test Method for Tensile Strain-Hardening Exponents (<span class="bdit">n</span> -Values) of Metallic Sheet Materials — 9 стр.
ASTM A653/A653M-09a
Заменен
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process — 13 стр.
ASTM A653/A653M-08
Заменен
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process — 13 стр.

На этот документ ссылаются

ASTM E936-98
Заменен
Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing — 25 стр.
ASTM D5933-96(2001)
Заменен
Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions — 5 стр.
ASTM D5933-96
Заменен
Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions — 5 стр.
ASTM C847-06
Заменен
Standard Specification for Metal Lath — 2 стр.
ASTM C847-04
Заменен
Standard Specification for Metal Lath — 2 стр.
ASTM C955-01
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C955-03
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C955-06
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C955-07
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C955-08
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C955-09
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C645-07a
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C645-07b
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C645-04a
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C645-08a
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C955-08a
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C1047-04
Заменен
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base — 3 стр.
ASTM C1047-05
Заменен
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base — 3 стр.
ASTM C921-02
Заменен
Standard Specification for Jackets for Thermal Insulation — 4 стр.
ASTM C754-04
Заменен
Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products — 9 стр.
ASTM C754-09
Заменен
Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products — 11 стр.
ASTM C754-07
Заменен
Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products — 11 стр.
ASTM C754-08
Заменен
Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products — 11 стр.
ASTM C754-00
Заменен
Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products — 9 стр.
ASTM C921-03a
Заменен
Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation — 4 стр.
ASTM C645-09
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C645-08
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C645-04
Заменен
Standard Specification for Nonstructural Steel Framing Members — 7 стр.
ASTM C645-07
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C645-06
Заменен
Standard Specification for Nonstructural Steel Framing Members — 6 стр.
ASTM C645-03
Заменен
Standard Specification for Nonstructural Steel Framing Members — 7 стр.
ASTM C847-95(2000)
Заменен
Standard Specification for Metal Lath — 2 стр.
ASTM C1047-99(2004)
Заменен
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base — 3 стр.
ASTM C1047-99
Заменен
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base — 3 стр.
ASTM C955-00a
Заменен
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases — 4 стр.
ASTM C921-89(1996)
Заменен
Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation — 3 стр.
ASTM C645-00
Заменен
Standard Specification for Nonstructural Steel Framing Members — 7 стр.
ASTM A1019/A1019M-01
Заменен
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains — 6 стр.
ASTM F1178-01
Заменен
Standard Specification for Enameling System, Baking, Metal Joiner Work and Furniture — 8 стр.
ASTM F1178-88(1994)
Заменен
Standard Specification for Enameling System, Baking, Metal Joiner Work and Furniture — 8 стр.
ASTM F2435-05
Заменен
Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe — 5 стр.
ASTM F1043-03
Заменен
Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework — 6 стр.
ASTM F1043-04
Заменен
Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework — 6 стр.
ASTM F1043-06
Заменен
Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework — 6 стр.
ASTM F1043-00
Заменен
Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework — 6 стр.
ASTM A924/A924M-06
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 8 стр.
ASTM A924/A924M-08
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 10 стр.
ASTM A924/A924M-04
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 8 стр.
ASTM A924/A924M-07
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 9 стр.
ASTM A924/A924M-09
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 11 стр.
ASTM A924/A924M-99
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 9 стр.
ASTM A924/A924M-08a
Заменен
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process — 11 стр.
ASTM A787-01
Заменен
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing — 6 стр.
ASTM A787-00
Заменен
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing — 6 стр.
ASTM F2408-04
Заменен
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular — 7 стр.
ASTM F2408-06
Заменен
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets — 7 стр.
ASTM F2408-07
Заменен
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets — 7 стр.
ASTM A653/A653M-09a
Заменен
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process — 13 стр.
ASTM A653/A653M-08
Заменен
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process — 13 стр.
ASTM C1063-99
Заменен
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster — 8 стр.
ASTM C1063-07
Заменен
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster — 9 стр.
ASTM C1063-06
Заменен
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster — 9 стр.
ASTM C1063-03
Заменен
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster — 9 стр.
ASTM F683-00
Заменен
Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery — 34 стр.
ASTM F683-02
Заменен
Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery — 34 стр.
ASTM F683-03
Заменен
Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery — 34 стр.
ASTM F683-99
Заменен
Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery — 34 стр.
ASTM F683-03a
Заменен
Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery — 34 стр.
ASTM E1514-98
Заменен
Standard Specification for Structural Standing Seam Steel Roof Panel Systems — 5 стр.
ASTM A755/A755M-99
Заменен
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products — 6 стр.
ASTM A755/A755M-03
Заменен
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products — 5 стр.
ASTM A755/A755M-01
Заменен
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products — 5 стр.
ASTM F1697-01a
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits — 5 стр.
ASTM F1697-96
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits — 5 стр.
ASTM F1697-07
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit — 7 стр.
ASTM F1697-08
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit — 7 стр.
ASTM F1697-01
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits — 5 стр.
ASTM F1697-02
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits — 6 стр.
ASTM F1697-08e1
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit — 7 стр.
ASTM F1697-01ae1
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits — 5 стр.
ASTM C956-97(2002)e1
Заменен
Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete — 6 стр.
ASTM C956-97
Заменен
Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete — 6 стр.
ASTM A1003/A1003M-08
Заменен
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members — 6 стр.
ASTM A1003/A1003M-05
Заменен
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members — 6 стр.
ASTM A1003/A1003M-00
Заменен
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members — 6 стр.
ASTM A1003/A1003M-02
Заменен
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members — 6 стр.
ASTM A1003/A1003M-01
Заменен
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members — 6 стр.
ASTM A1003/A1003M-02a
Заменен
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members — 6 стр.
ASTM A90/A90M-01
Заменен
Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings — 4 стр.
ASTM A90/A90M-06
Заменен
Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings — 4 стр.
ASTM A90/A90M-07
Заменен
Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings — 5 стр.
ASTM A90/A90M-95a(1999)
Заменен
Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings — 4 стр.
ASTM A754/A754M-06
Заменен
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence — 8 стр.
ASTM A754/A754M-96(2000)
Заменен
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence — 7 стр.
ASTM A754/A754M-96(2004)
Заменен
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence — 7 стр.