This specification covers general requirements for alloy steel rods and uncoated coarse round alloy wire in coils that are not required to meet hardenability band limits. Formerly under the jurisdiction of Committee A01 on Steel, Stainless Steel, and Related Alloys, this specification was withdrawn in December 2011 and replaced by Specification A510/A510M for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel.

This specification deals with the general requirements for alloy steel rods and uncoated coarse round alloy wire in coils that are not required to meet hardenability band limits. Heat and product analyses shall be used to verify that the required percentage of chemical compositions for carbon, manganese, phosphorus, sulfur, vanadium, titanium, nickel, chromium, molybdenum, copper, tungsten, aluminum, and lead are within the specified limit. Required grain sizes shall be determined and specified as annealed, spheroidize annealed, or patented. Tensile strength for annealed alloy rod and wires shall be evaluated using a tensile tests.

1.1 This specification covers general requirements for alloy steel rods and uncoated coarse round alloy wire in coils that are not required to meet hardenability band limits.

1.2 In case of conflict, the requirements in the purchase order, on the drawing, in the individual specification, and in this general specification shall prevail in the sequence named.

Note 1—This specification is the metric counterpart of Specification A752.