Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM A961-02

Заменен
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications — 7 стр.
Область применения

1.1 This specification covers a group of common requirements that shall apply to steel flanges, forged fittings, valves, and parts for piping applications under any of the following individual product specifications:

Title of Specification ASTM DesignationForgings, Carbon Steel, for Piping Components A105/A105MForgings, Carbon Steel, for General-Purpose Piping A181/A181MForged or Rolled Alloy-Steel Pipe Flanges, Forged A182/A182M Fittings, and Valves and Parts for High Temperature ServiceForgings, Carbon and Low Alloy Steel, Requiring Notch A350/A350MToughness Testing for Piping Components Forged or Rolled 8 and 9% Nickel AlloyA522/A522MSteel Flanges, Fittings, Valves, and Partsfor Low-Temperature ServiceForgings, Carbon and Alloy Steel, for Pipe Flanges, A694/A694MFittings, Valves, and Parts for High-Pressure Transmission Service Flanges, Forged, Carbon and Alloy Steel for Low A707/A707MTemperature Service Forgings, Carbon Steel, for Piping Components with A727/A727MInherent Notch Toughness Forgings, Titanium-Stabilized Carbon Steel, for A836/A836MGlass-Lined Piping and Pressure Vessel Service

1.2 In case of conflict between a requirement of the individual product specification and a requirement of this general requirement specification, the requirements of the individual product specification shall prevail over those of this specification.

1.2 By mutual agreement between the purchaser and the supplier, additional requirements may be specified (see section 4.1.2). The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order as agreed upon between the purchaser and supplier.

1.3 The values stated in either inch-pound units or SI units (metric) are to be regarded separately as standard. Within the text and the tables, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation (SI) of the product specification is specified in the order.

ICS
23.040.01 Pipeline components and pipelines in general / Трубопроводы и их компоненты в целом
77.140.20 Stainless. Including alloyed steels, corrosion-resistant steels, heat-resisting steels, etc. / Высококачественные стали
Сборник ASTM
01.01 Steel--Piping, Tubing, Fittings / Сталь - Система трубопроводов, Трубы, Фитинги
Тематика
Steel--Structural, Tubes, Plate, Coated