Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM B372-97(2003)

Заменен
Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube — 6 стр.
Реферат

This specification covers seamless copper and copper-alloy rectangular waveguide tube intended for use as transmission lines in electronic equipment. Four types of material are specified having the following nominal compositions: C10200, C10300, C12000, and C22000. The copper and copper-alloy tubes shall be finished by such cold-working and annealing operations as are necessary to meet the required properties. The material shall conform to the chemical requirements specified. The material shall conform to the Rockwell hardness requirements prescribed. The test specimens of copper UNS nos. C10200, C10300, and C12000 shall be free of cuprous oxide. It is to be expected that samples of Copper UNS Nos. C10200, C10300, and C12000 shall be capable of passing the embrittlement test. It is to be expected that samples of copper UNS nos. C10200, C10300, and C12000 will conform to the prescribed electrical resistivity requirements. Samples for chemical analysis shall be taken accordingly.

Область применения

1.1 This specification covers seamless copper and copper-alloy rectangular tube intended for use as transmission lines in electronic equipment. Four types of material are specified having the following nominal compositions:

Copper or Copper Alloy UNS No. Previously Used DesignationNominal Composition, % Copper ZincPhos- phorusC10200Copper, Type OF100......C10300...99.99...0.003C12000Copper, Type DLP100......C22000Commercial bronze, 90 %9010... Types OF and DLP are described in Classification B 224.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

ICS
77.150.30 Copper products / Продукция из меди
Сборник ASTM
02.01 Copper and Copper Alloys / Медь и сплавы из меди
Тематика
Copper