Реферат

This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service. Welded pipe shall be made from annealed flat-rolled products by a welding process. Welded pipe may be further reduced by cold working or hot working. Grades 1, 2, 2 H, 7, 7H, 11,13, 14, 16, 16H, 17, 26H, 33, and 37 shall be furnished as welded or annealed. Grades 3, 12, 15, and 34 shall be furnished as annealed. Grade 5, 23, 24, 25, 35 shall be furnished as annealed, or aged. Grade 9, 18, 38 shall be furnished as annealed. Grade 19, 20, 21 shall be furnished as solution treated, or solution treated and aged. The materials shall conform to the required chemical composition for nitrogen, carbon, hydrogen, iron, oxygen, aluminum, vanadium, tin, ruthenium, palladium, cobalt, molybdenum, chromium, nickel, niobium, zirconium, silicon, and titanium. They shall also conform to the required mechanical propetries such as tensile strength, yield strength, and elongation.

Область применения

1.1 This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service as follows:

1.1.1 Grade 1—UNS R50250. Unalloyed titanium, low oxygen,

1.1.2 Grade 2—UNS R50400. Unalloyed titanium, standard oxygen,

1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS),

1.1.3 Grade 3—UNS R50550. Unalloyed titanium, medium oxygen,

1.1.4 Grade 5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium),

1.1.5 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium, standard oxygen,

1.1.5.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS),

1.1.6 Grade 9—UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium),

1.1.7 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.25 % palladium, low oxygen,

1.1.8 Grade 12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

1.1.9 Grade 13—UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), low oxygen,

1.1.10 Grade 14—UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), standard oxygen,

1.1.11 Grade 15—UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), medium oxygen,

1.1.12 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium, standard oxygen,

1.1.12.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS),

1.1.13 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium, low oxygen,

1.1.14 Grade 18—UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.04 to 0.08 % palladium),

1.1.15 Grade 19—UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),

1.1.16 Grade 20—UNS R58645. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 to 0.08 % palladium,

1.1.17 Grade 21—UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),

1.1.18 Grade 23—UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI),

1.1.19 Grade 24—UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 to 0.08 % palladium,

1.1.20 Grade 25—UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 to 0.8 % nickel and 0.04 to 0.08 % palladium,

1.1.21 Grade 26—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.21.1 Grade 26H—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi (400 MPa) minimum UTS),

1.1.22 Grade 27—UNS R52254. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.23 Grade 28—UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,

1.1.24 Grade 29—UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements (ELI)) plus 0.08 to 0.14 % ruthenium,

1.1.25 Grade 33—UNS R53442. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.26 Grade 34—UNS R53445. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.27 Grade 35—UNS R56340. Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

1.1.28 Grade 37—UNS R52815. Titanium alloy (1.5 % aluminum),

1.1.29 Grade 38—UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron), and

1.1.30 Grade 39—UNS R53390. Titanium alloy (0.25 % iron, 0.4 % silicon).

Note 1—H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use.

1.2 Pipe 8 in. NPS (nominal pipe size) and larger is most frequently custom made for an order. In such cases, the purchaser carefully should consider the applicability of this specification. Since the pipe is custom made, the purchaser may choose a wall thickness other than those in Table 1 to meet specific operating conditions. The purchaser may also be better served to specify only the portions of this specification that are required to meet the operating conditions (for example, annealing, flattening test, chemistry, properties, etc.).

TABLE 1 Dimensions of PipeNote 1—Schedule sizes conform to ANSI/ASME B 36.19M-1985 (for “S” sizes) or B 36.10 (for non-S sizes).Note 2—The decimal thickness listed for the respective pipe sizes represent their nominal wall dimensions.

NPS Desig.

Outside Dia.

Nominal Wall Thickness

 

Schedule 5S^A

Schedule 5^A

Schedule 10S^A

Schedule 10^A

Schedule 40S

Schedule 40

Schedule 80S

Schedule 80

in

mm

in

mm

in

mm

in

mm

in

mm

in

mm

in

mm

in

mm

in

mm

¹/₈ 

0.405

10.29

x

x

x

x

0.049

1.24

0.049

1.24

0.068

1.73

0.068

1.73

0.095

2.41

0.095

2.41

¹/₄ 

0.540

13.72

x

x

x

x

0.065

1.65

0.065

1.65

0.088

2.24

0.088

2.24

0.119

3.02

0.119

3.02

³/₈ 

0.675

17.15

x

x

x

x

0.065

1.65

0.065

1.65

0.091

2.31

0.091

2.31

0.126

3.20

0.126

3.20

¹/₂ 

0.840

21.34

0.065

1.65

0.065

1.65

0.083

2.11

0.083

2.11

0.109

2.77

0.109

2.77

0.147

3.73

0.147

3.73

³/₄ 

1.050

26.67

0.065

1.65

0.065

1.65

0.083

2.11

0.083

2.11

0.113

2.87

0.113

2.87

0.154

3.91

0.154

3.91

1

1.315

33.40

0.065

1.65

0.065

1.65

0.109

2.77

0.109

2.77

0.133

3.38

0.133

3.38

0.179

4.55

0.179

4.55

1-¹/₄ 

1.660

42.16

0.065

1.65

0.065

1.65

0.109

2.77

0.109

2.77

0.140

3.56

0.140

3.56

0.191

4.85

0.191

4.85

1-¹/₂ 

1.900

48.26

0.065

1.65

0.065

1.65

0.109

2.77

0.109

2.77

0.145

3.68

0.145

3.68

0.200

5.08

0.200

5.08

2

2.375

60.32

0.065

1.65

0.065

1.65

0.109

2.77

0.109

2.77

0.154

3.91

0.154

3.91

0.218

5.54

0.218

5.54

2-¹/₂ 

2.875

73.02

0.083

2.11

0.083

2.11

0.120

3.05

0.120

3.05

0.203

5.16

0.203

5.16

0.276

7.01

0.276

7.01

3

3.500

88.90

0.083

2.11

0.083

2.11

0.120

3.05

0.120

3.05

0.216

5.49

0.216

5.49

0.300

7.62

0.300

7.62

3-¹/₂ 

4.000

101.60

0.083

2.11

0.083

2.11

0.120

3.05

0.120

3.05

0.226

5.74

0.226

5.74

0.318

8.08

0.318

8.08

4

4.500

114.30

0.083

2.11

0.083

2.11

0.120

3.05

0.120

3.05

0.237

6.02

0.237

6.02

0.337

8.56

0.337

8.56

5

5.563

141.30

0.109

2.77

0.109

2.77

0.134

3.40

0.134

3.40

0.258

6.55

0.258

6.55

0.375

9.53

0.375

9.53

6

6.625

168.27

0.109

2.77

0.109

2.77

0.134

3.40

0.134

3.40

0.280

7.11

0.280

7.11

0.432

10.97

0.432

10.97

8

8.625

219.07

0.109

2.77

0.109

2.77

0.148

3.76

0.148

3.76

0.322

8.18

0.322

8.18

0.500

12.70

0.500

12.70

10

10.75

273.05

0.134

3.40

0.134

3.40

0.165

4.19

0.165

4.19

0.365

9.27

0.365

9.27

0.500

12.70

0.594

15.09

12

12.75

323.85

0.156

3.96

0.156

3.96

0.180

4.57

0.180

4.57

0.375

9.53

0.406

10.31

0.500

12.70

0.688

17.48

14

14.00

355.60

0.156

3.96

0.156

3.96

0.188

4.78

0.250

6.35

x

x

0.438

11.13

x

x

0.750

19.05

16

16.00

406.40

0.165

4.19

0.165

4.19

0.188

4.78

0.250

6.35

x

x

0.500

12.70

x

x

0.844

21.44

18

18.00

457.20

0.165

4.19

0.165

4.19

0.188

4.78

0.250

6.35

x

x

0.562

14.27

x

x

0.938

23.83

20

20.00

508.00

0.188

4.78

0.188

4.78

0.218

5.54

0.250

6.35

x

x

0.594

15.09

x

x

1.031

26.19

22

22.00

558.80

0.188

4.78

0.188

4.78

0.218

5.54

0.250

6.35

x

x

x

x

x

x

1.125

28.58

24

24.00

609.60

0.218

5.54

0.218

5.54

0.250

6.35

0.250

6.35

x

x

0.688

17.48

x

x

1.219

30.96

26

26.00

660.40

x

x

x

x

x

x

0.312

7.92

x

x

x

x

x

x

x

x

28

28.00

711.20

x

x

x

x

x

x

0.312

7.92

x

x

x

x

x

x

x

x

30

30.00

762.00

0.250

6.35

0.250

6.35

0.312

7.92

0.312

7.92

x

x

x

x

x

x

x

x

32

32.00

812.80

x

x

x

x

x

x

0.312

7.92

x

x

0.688

17.48

x

x

x

x

34

34.00

863.60

x

x

x

x

x

x

0.312

7.92

x

x

0.688

17.48

x

x

x

x

36

36.00

914.40

x

x

x

x

x

x

0.312

7.92

x

x

0.750

19.05

x

x

x

x

^A Threading not permitted in accordance with ANSI B.1.20.1.

1.3 Optional supplementary requirements are provided for pipe where a greater degree of testing is desired. These supplementary requirements may be invoked by the purchaser, when desired, by specifying in the order.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.