This test method is for measuring the specular gloss of paper at 75° (15° from the plane of paper).

Formerly under the jurisdiction of Committee D06 on Paper and Paper Products, this test method was withdrawn in May 2010 because equivalent TAPPI and ISO publications exist.

This test method is widely used as a partial measure of the surface quality and shiny appearance of coated paper.

1.1 This test method is for measuring the specular gloss of paper at 75 (15 from the plane of paper).

1.2 Although its chief application is to coated papers (), this test method may also be used for uncoated papers.

1.3 This test method is not a measure of image-reflecting quality and should not be used for cast-coated, lacquered, highly varnished (, , )or waxed papers (), and high-gloss ink films (). For these purposes, TAPPI T 653 "Specular Gloss of Paper and Paperboard at 20 Degrees" is preferred, although the present method has been shown to be suitable for gloss measurements of most other ink films on paper or paperboard. Here, differences in the color and the diffuse reflectances of these ink films have a negligible effect on measured gloss. For example, on comparing white and black surfaces which are otherwise identical, the white surface will measure less than one gloss unit higher than the black.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.