Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM D1505-18

Действует
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM E691-23
Действует
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method — 23 стр.
ASTM D4703-16
Действует
Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets — 13 стр.
ASTM D883-24a
Действует
Standard Terminology Relating to Plastics — 18 стр.
ASTM D2839-16(2023)
Действует
Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene — 2 стр.
ASTM D1505-10
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.

На этот документ ссылаются

BS ISO 12891-2:2014
Действует
Retrieval and analysis of surgical implants. Analysis of retrieved surgical implants — 38 стр.
BS EN ISO 21809-1:2011
Заменен
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Polyolefin coatings (3-layer PE and 3-layer PP) — 64 стр.
BS EN ISO 21809-1:2018
Действует
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Polyolefin coatings (3-layer PE and 3-layer PP) — 70 стр.
ASTM F2854-10(2016)
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 4 стр.
ASTM F2720/F2720M-09
Заменен
Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe (Withdrawn 2016) — 8 стр.
ASTM F2025-06(2018)
Действует
Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment — 7 стр.
ASTM F755-99(2011)
Заменен
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants — 3 стр.
ASTM F2313-10
Заменен
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide — 10 стр.
ASTM F2025-06(2012)
Заменен
Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment — 7 стр.
ASTM F561-13
Заменен
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids — 20 стр.
ASTM F2579-10
Заменен
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants — 11 стр.
ASTM D5577-94(2010)e1
Заменен
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019) — 5 стр.
ASTM D787-12
Заменен
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds — 4 стр.
ASTM D5747/D5747M-08(2013)e1
Заменен
Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids — 7 стр.
ASTM D6645-01(2010)
Заменен
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry — 4 стр.
ASTM D7273/D7273M-08(2013)e1
Заменен
Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites — 4 стр.
ASTM F2854-20
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 5 стр.
ASTM D4649-03(2016)
Заменен
Standard Guide for Selection and Use of Stretch Wrap Films — 11 стр.
ASTM D5576-00(2013)
Заменен
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) — 3 стр.
ASTM D5747/D5747M-20
Заменен
Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids — 7 стр.
ASTM F648-14
Заменен
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants — 8 стр.
ASTM F2820-12
Заменен
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications — 6 стр.
ASTM D7082-15
Заменен
Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe — 4 стр.
ASTM F2854-20a
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 5 стр.
ASTM F2848-17
Заменен
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns — 5 стр.
ÖNORM EN ISO 21809-1:2012-04
Заменен
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
ASTM F1545-15a
Заменен
Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges — 9 стр.
ASTM F2929-17
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig — 10 стр.
ASTM D6248-98(2012)e1
Заменен
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021) — 3 стр.
ASTM D5721-08(2013)
Заменен
Standard Practice for Air-Oven Aging of Polyolefin Geomembranes — 3 стр.
ASTM D5721-08(2018)
Заменен
Standard Practice for Air-Oven Aging of Polyolefin Geomembranes — 3 стр.
ASTM F2805-16
Заменен
Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections — 8 стр.
ASTM F3123-18a
Заменен
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) — 14 стр.
ASTM F1925-17
Заменен
Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants — 9 стр.
ASTM F3123-18
Заменен
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) — 12 стр.
ASTM F3123-16
Заменен
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) — 12 стр.
ASTM D7791-17
Заменен
Standard Test Method for Uniaxial Fatigue Properties of Plastics — 5 стр.
ASTM D7774-17
Заменен
Standard Test Method for Flexural Fatigue Properties of Plastics — 6 стр.
ASTM D3485-15
Заменен
Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC) — 6 стр.
ASTM D1593-19
Заменен
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting — 4 стр.
ASTM D1593-13
Заменен
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting — 4 стр.
ASTM F2160-22
Заменен
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — 7 стр.
ASTM F2160-16
Заменен
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — 7 стр.
ASTM D6495/D6495M-18
Заменен
Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners — 4 стр.
ASTM D5889/D5889M-18
Заменен
Standard Practice for Quality Control of Geosynthetic Clay Liners — 3 стр.
ASTM D4976-12a
Заменен
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials — 8 стр.
ASTM D6248-21
Действует
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry — 3 стр.
ASTM D6645-18
Действует
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry — 4 стр.
ASTM D2238-22
Действует
Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup> — 7 стр.
ASTM F2579-18
Действует
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants — 12 стр.
ASTM D2839-16
Заменен
Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene — 2 стр.
ASTM F2818-10(2014)e1
Заменен
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing — 7 стр.
ASTM F2818-10(2019)
Заменен
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing — 7 стр.
ASTM F2026-23
Действует
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications — 5 стр.
ASTM F2026-17
Заменен
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications — 5 стр.
ASTM F648-21
Действует
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants — 9 стр.
ASTM D4762-18
Заменен
Standard Guide for Testing Polymer Matrix Composite Materials — 25 стр.
ASTM D4762-16
Заменен
Standard Guide for Testing Polymer Matrix Composite Materials — 22 стр.
ASTM D5047-17
Заменен
Standard Specification for Polyethylene Terephthalate Film and Sheeting — 3 стр.
ASTM D2734-23
Действует
Standard Test Methods for Void Content of Reinforced Plastics — 4 стр.
ASTM D4397-16
Заменен
Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications — 4 стр.
ASTM D2839-16(2023)
Действует
Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene — 2 стр.
ASTM D2103-23
Заменен
Standard Specification for Polyethylene Film and Sheeting — 5 стр.
ASTM D2103-15
Заменен
Standard Specification for Polyethylene Film and Sheeting — 5 стр.
ASTM D4101-17
Заменен
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials — 17 стр.
ASTM D4101-17e1
Заменен
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials — 17 стр.
ASTM D3981-09a(2016)
Заменен
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications — 5 стр.
ASTM F2848-21
Действует
Standard Specification for Medical-Grade Ultra-High-Molecular-Weight Polyethylene Yarns — 6 стр.
ASTM F639-09(2015)
Заменен
Standard Specification for Polyethylene Plastics for Medical Applications — 3 стр.
ASTM E252-06(2021)e1
Заменен
Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement — 5 стр.
ASTM E252-24
Действует
Standard Test Method for Thickness of Foil and Thin Sheet by Mass Measurement — 5 стр.
ASTM D2684/D2684M-24
Действует
Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products — 5 стр.
ASTM D5514/D5514M-18
Заменен
Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics — 6 стр.
ASTM D4649-20
Действует
Standard Guide for Use of Stretch Films and Wrapping Application — 9 стр.
ASTM D1593-22
Действует
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting — 4 стр.
ASTM D6495-14
Заменен
Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners — 4 стр.
ASTM F2764/F2764M-18
Заменен
Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 9 стр.
ASTM F2764/F2764M-17e1
Заменен
Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 9 стр.
ASTM F2764/F2764M-18a
Заменен
Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 9 стр.
ASTM F2764/F2764M-19
Заменен
Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 9 стр.
ASTM F2764/F2764M-23
Заменен
Standard Specification for 6 in. to 60 in. [150 mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 9 стр.
ASTM F2389-19
Заменен
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems — 10 стр.
ASTM F2389-21
Заменен
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems — 10 стр.
ASTM F2389-23
Заменен
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems — 10 стр.
ASTM F2389-24
Заменен
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems — 10 стр.
ASTM F2389-17a
Заменен
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems — 10 стр.
ASTM F639-09(2024)
Действует
Standard Specification for Polyethylene Plastics for Medical Applications — 4 стр.
ASTM F1579-02e1
Отменен
Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications (Withdrawn 2011) — 6 стр.
ASTM F1876-98(2003)e1
Отменен
Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012) — 4 стр.
ASTM F755-19
Действует
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants — 4 стр.
ASTM F2820-12(2021)e1
Действует
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications — 5 стр.
ASTM D4321-24
Действует
Standard Test Method for Package Yield of Plastic Film — 4 стр.
ASTM D3800-22
Действует
Standard Test Method for Density of High-Modulus Fibers — 6 стр.
ASTM D6434-12(2018)
Действует
Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes — 3 стр.
ASTM D5203-07
Отменен
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Withdrawn 2016) — 4 стр.
ASTM D5576-00(2021)e1
Действует
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) — 3 стр.
ASTM D4801-08(2016)
Действует
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater — 5 стр.
ASTM D7082-21
Действует
Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe — 4 стр.
ASTM D5047-17(2023)
Действует
Standard Specification for Polyethylene Terephthalate Film and Sheeting — 3 стр.
ASTM D3350-24
Действует
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 9 стр.