Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM D1978-91(2018)

Заменен
Standard Guide for Analysis of Electrocoat Bath Samples — 2 стр.
Значение и использование

3.1 This guide indicates test procedures recommended for the maintenance of acceptable performance of the paint in an electrocoating bath. Several critical parameters must be determined throughout the operation of the bath. These parameters must be adjusted when deviations from the norm occur.

3.2 The test methods for electrocoat baths are unique, as the aqueous samples have a nonvolatile content between 8 and 25 %. Constant agitation must be present when the samples are taken and during the measurement of some of the parameters.

Область применения

1.1 This guide covers the selection of test methods for determination of the important parameters that affect the performance of electrocoating paints.

1.2 The test methods involved are D4370, D4399, D4584, and D5145.

1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ICS
25.220.20 Surface. Including anodization, conversion coating, thermal spraying, etc. / Обработка поверхности. Включая анодирование, покрытия, химически взаимодействующие с подложкой, термораспыление и т.д.
Сборник ASTM
06.01 Paint –– Tests for Chemical, Physical, and Optical Properties; Appearance / Красители – Испытания на Химические, Физические и Оптические свойства; Внешний вид
Тематика
Paints & Related Coatings