ASTM D2513-06a

Заменен

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 26 стр.

Ссылочные документы

ASTM F1055-98(2006)

Заменен

Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing — 8 стр.

ASTM F1563-01(2007)

Заменен

Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing — 3 стр.

ASTM F1473-07

Заменен

Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins — 6 стр.

ASTM F1733-07

Заменен

Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 6 стр.

ASTM F412-09

Заменен

Standard Terminology Relating to Plastic Piping Systems — 16 стр.

ASTM F402-05

Заменен

Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings — 2 стр.

ASTM F2138-09

Заменен

Standard Specification for Excess Flow Valves for Natural Gas Service — 5 стр.

ASTM D792-08

Заменен

Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.

ASTM D789-07

Заменен

Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA) — 7 стр.

ASTM D618-08

Заменен

Standard Practice for Conditioning Plastics for Testing — 4 стр.

ASTM D638-08

Заменен

Standard Test Method for Tensile Properties of Plastics — 16 стр.

ASTM D543-06

Заменен

Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents — 7 стр.

ASTM D4883-08

Заменен

Standard Test Method for Density of Polyethylene by the Ultrasound Technique (Withdrawn 2017) — 4 стр.

ASTM D4101-09

Заменен

Standard Specification for Polypropylene Injection and Extrusion Materials — 17 стр.

ASTM D4066-01a(2008)

Заменен

Standard Classification System for Nylon Injection and Extrusion Materials (PA) (Withdrawn 2012) — 19 стр.

ASTM D2855-96(2002)

Заменен

Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings — 7 стр.

ASTM D3261-03

Заменен

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing — 6 стр.

ASTM D3350-08

Заменен

Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 7 стр.

ASTM D2765-01(2006)

Заменен

Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics — 8 стр.

ASTM D2467-06

Заменен

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 — 8 стр.

ASTM D2466-06

Заменен

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 — 6 стр.

ASTM D2837-08

Заменен

Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products — 16 стр.

ASTM D2444-99(2005)

Заменен

Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) — 8 стр.

ASTM D2564-04e1

Заменен

Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems — 5 стр.

ASTM D2672-96a(2003)

Заменен

Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement — 4 стр.

ASTM D2412-02(2008)

Заменен

Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading — 6 стр.

ASTM D2774-08

Заменен

Standard Practice for Underground Installation of Thermoplastic Pressure Piping — 7 стр.

ASTM D2241-05

Заменен

Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) — 9 стр.

ASTM D2152-95(2003)

Заменен

Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion — 4 стр.

ASTM D2290-08

Заменен

Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method — 6 стр.

ASTM D2122-98(2004)

Заменен

Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings — 5 стр.

ASTM D1505-03

Заменен

Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.

ASTM D1598-02(2008)

Заменен

Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure — 4 стр.

ASTM D1784-08

Заменен

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds — 4 стр.

ASTM D1600-08

Заменен

Standard Terminology for Abbreviated Terms Relating to Plastics — 10 стр.

ASTM D1599-99(2005)

Заменен

Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings — 3 стр.

ASTM D1238-04c

Заменен

Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 14 стр.

ASTM D2657-07

Заменен

Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings — 7 стр.

ASTM D2683-04

Заменен

Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing — 5 стр.

ASTM D2513-06b

Заменен

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 26 стр.

ASTM D2513-06

Заменен

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 26 стр.

На этот документ ссылаются

ASTM D2513-06

Заменен

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 26 стр.

ASTM D2513-06b

Заменен

Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 26 стр.