Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
Корзина
ASTM
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM D2513-09

Заменен
Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 26 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM D4883-08
Заменен
Standard Test Method for Density of Polyethylene by the Ultrasound Technique (Withdrawn 2017) — 4 стр.
ASTM D2837-08
Заменен
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products — 16 стр.
ASTM D2774-08
Заменен
Standard Practice for Underground Installation of Thermoplastic Pressure Piping — 7 стр.
ASTM D1238-04c
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 14 стр.
ASTM F402-05
Заменен
Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings — 2 стр.
ASTM D1784-08
Заменен
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds — 4 стр.
ASTM D1600-08
Заменен
Standard Terminology for Abbreviated Terms Relating to Plastics — 10 стр.
ASTM F412-09
Заменен
Standard Terminology Relating to Plastic Piping Systems — 16 стр.
ASTM D638-08
Заменен
Standard Test Method for Tensile Properties of Plastics — 16 стр.
ASTM D789-07
Заменен
Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA) — 7 стр.
ASTM D792-08
Заменен
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.
ASTM D1505-03
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D1598-02(2009)
Заменен
Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure — 4 стр.
ASTM D1599-99(2005)
Заменен
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings — 3 стр.
ASTM D2122-98(2004)
Заменен
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings — 5 стр.
ASTM D2152-95(2003)
Заменен
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion — 4 стр.
ASTM D2290-08
Заменен
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method — 6 стр.
ASTM D2412-02(2008)
Заменен
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading — 6 стр.
ASTM D2444-99(2005)
Заменен
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) — 8 стр.
ASTM D2765-01(2006)
Заменен
Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics — 8 стр.
ASTM D2855-96(2002)
Заменен
Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings — 7 стр.
ASTM F1473-07
Заменен
Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins — 6 стр.
ASTM D543-06
Заменен
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents — 7 стр.
ASTM D618-08
Заменен
Standard Practice for Conditioning Plastics for Testing — 4 стр.
ASTM D1898-68(1989)
Отменен
Standard Practice for Sampling of Plastics (Withdrawn 1998) — 10 стр.
ASTM D2657-07
Заменен
Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings — 7 стр.
ASTM D2241-09
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) — 9 стр.
ASTM D2466-06
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 — 6 стр.
ASTM D2467-06
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 — 8 стр.
ASTM D2564-04e1
Заменен
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems — 5 стр.
ASTM D2672-96a(2009)
Заменен
Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement — 4 стр.
ASTM D2740-89
Отменен
Specification for Polyvinyl Chloride (PVC) Plastic Tubing (Withdrawn 1989) — 4 стр.
ASTM D2683-04
Заменен
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing — 5 стр.
ASTM D3261-03
Заменен
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing — 6 стр.
ASTM D3350-08
Заменен
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 7 стр.
ASTM D4066-01a(2008)
Заменен
Standard Classification System for Nylon Injection and Extrusion Materials (PA) (Withdrawn 2012) — 19 стр.
ASTM D4101-09
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials — 17 стр.
ASTM F1055-98(2006)
Заменен
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing — 8 стр.
ASTM F1563-01(2007)
Заменен
Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing — 3 стр.
ASTM F1733-07
Заменен
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 6 стр.
ASTM F2138-09
Заменен
Standard Specification for Excess Flow Valves for Natural Gas Service — 5 стр.
ASTM D2513-09a
Заменен
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings — 16 стр.
ASTM D2513-08b
Заменен
Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 25 стр.

На этот документ ссылаются

ASTM F1041-02
Заменен
Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing — 2 стр.
ASTM F1948-99a
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1924-01
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F1588-96
Заменен
Standard Test Method for Constant Tensile Load Joint Test (CTLJT) — 4 стр.
ASTM F1734-96
Заменен
Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe — 3 стр.
ASTM F1804-97
Заменен
Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation — 2 стр.
ASTM F1588-96(2002)
Заменен
Standard Test Method for Constant Tensile Load Joint Test (CTLJT) — 4 стр.
ASTM F1055-98e1
Заменен
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing — 8 стр.
ASTM F905-96
Заменен
Standard Practice for Qualification of Polyethylene Saddle Fusion Joints — 2 стр.
ASTM F1973-99
Заменен
Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems — 4 стр.
ASTM F1973-02
Заменен
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems — 5 стр.
ASTM F1973-05
Заменен
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems — 5 стр.
ASTM F1973-99e2
Заменен
Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems — 4 стр.
ASTM F2145-01(2007)
Заменен
Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing — 4 стр.
ASTM F1563-01
Заменен
Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing — 3 стр.
ASTM F1563-94(2000)
Заменен
Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing — 3 стр.
ASTM F2600-06
Заменен
Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing — 10 стр.
ASTM F1041-95
Заменен
Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing — 2 стр.
ASTM F689-97
Заменен
Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings — 3 стр.
ASTM F1734-03
Заменен
Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe — 4 стр.
ASTM F1055-98
Заменен
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing — 6 стр.
ASTM F412-06
Заменен
Standard Terminology Relating to Plastic Piping Systems — 13 стр.
ASTM F2145-01
Заменен
Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing — 4 стр.
ASTM F1973-99e1
Заменен
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems — 4 стр.
ASTM F1924-98
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F1804-03
Заменен
Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation — 2 стр.
ASTM F1924-01e1
Заменен
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing — 4 стр.
ASTM F1948-99ae1
Заменен
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing — 5 стр.
ASTM F1733-96e1
Заменен
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 6 стр.
ASTM F1733-96
Заменен
Standard Specification for Butt heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 5 стр.
ASTM F1733-96(2002)
Заменен
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing — 6 стр.
ASTM F412-01a
Заменен
Standard Terminology Relating to Plastic Piping Systems — 13 стр.
ASTM F412-07
Заменен
Standard Terminology Relating to Plastic Piping Systems — 16 стр.
ASTM F412-00
Заменен
Standard Terminology Relating to Plastic Piping Systems — 13 стр.
ASTM F412-01
Заменен
Standard Terminology Relating to Plastic Piping Systems — 13 стр.
ASTM F412-01ae1
Заменен
Standard Terminology Relating to Plastic Piping Systems — 13 стр.
ASTM F1056-97
Заменен
Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings — 4 стр.
ASTM F1962-99
Заменен
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings — 17 стр.
ASTM D2683-98
Заменен
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing — 5 стр.
ASTM D3261-97
Заменен
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing — 6 стр.
ASTM D2513-08b
Заменен
Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings — 25 стр.
ASTM D2513-09a
Заменен
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings — 16 стр.