Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM D2689-88(1999)

Отменен
Standard Practices for Testing Alkyd Resins (Withdrawn 2008) — 3 стр.
Причина отмены Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, this practice was withdrawn in January 2008 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date. Значение и использование

These practices should be used as a reference for any alkyd resin analyst who wants general information about classifying alkyd resins. In each case, the significance and use of the specific classification item will be found in the referenced test method.6

Область применения

1.1 These practices cover test methods for testing alkyd resins as listed in Table 1. They are the test methods most often used to characterize alkyds. All of the analytical test methods were subjected to interlaboratory testing using oil-modified alkyds. Their adaptability to other types of alkyds has not been studied. Although each test method specifies a recommended amount of specimen for starting a separate analysis, several of the procedures can be conducted on the same starting specimen, if desired. For example, the tests for unsaponifiable matter, fatty acid content, oil identification, and phthalic acid content could all be run on a consecutive basis, if all were required.

ICS
87.060.20 Binders / Связующие вещества
Сборник ASTM
06.03 Paint –– Pigments, Polymers, Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles / Красители – Пигменты, Быстровысыхающие масла, Полимеры, Смолы, Канифольно-скипидарные продукты, Целлюлозный полимер, Связующее вещества для красок
Тематика
Paints & Related Coatings