Причина отмены This specification covered requirements for high-temperature electrical insulating tape consisting of glass cloth coated on one side with a pressure-sensitive adhesive.

Formerly under the jurisdiction of Committee D09 on Electrical and Electronic Insulating Materials, this specification was withdrawn in May 2022 without replacement due to its limited use by industry.

Реферат

This specification covers the requirements for two types of high-temperature electrical insulating tape consisting of glass cloth coated on one side with a pressure-sensitive adhesive. Type I, which is subdivided into two grades (Grade A and B) according to thickness, is woven glass cloth with silicone adhesive. Type II, on the other hand, is woven glass cloth impregnated with polytetrafluoroethylene, silicone adhesive. Tapes shall undergo tests that shall examine their conformance to the following requirements: standard thickness, width, and length; breaking strength; dielectric breakdown; adhesion strength both to steel and backing; high-humidity insulation resistance; unwind force; and accelerated aging.

Область применения

1.1 This specification covers requirements for high-temperature electrical insulating tape consisting of glass cloth coated on one side with a pressure-sensitive adhesive.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.