Причина отмены This specification covers test methods and tolerances applicable to the following properties of knitted fabrics: yield, mass (weight), width, length, fabric count, bursting strength, moisture regain, thickness, extractable matter, and fiber composition.

Formerly under the jurisdiction of Committee D13 on Textiles, this practice was withdrawn in January 2017 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

Knitted fabrics are known to exhibit inherent variations in properties. This specification lists the tolerances for each property deemed acceptable in the trade.

These tolerances can be used to determine if knitted fabrics meet specifications for properties, and provide a guide in case of dispute.

Tolerances agreed upon between the purchaser and the seller shall take precedence over those listed in this specification.

Реферат

This specification details the test methods and tolerances applicable to the following properties of knitted fabrics: yield; mass (weight); width; length; fabric count; bursting strength; moisture regain; thickness; extractable matter; and fiber composition. These tolerances are applicable to knitted fabrics of all types, such as warp knits, weft knits, flat bed knits, and so forth.

Область применения

1.1 This specification covers test methods and tolerances applicable to the following properties of knitted fabrics: yield, mass (weight), width, length, fabric count, bursting strength, moisture regain, thickness, extractable matter, and fiber composition.

1.2 These tolerances are applicable to knitted fabrics of all types, such as warp knits, weft knits, flat bed knits, and so forth.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.