Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM D4000-12

Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM D3935-09
Заменен
Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material — 7 стр.
ASTM D5021-00
Отменен
Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007) — 4 стр.
ASTM D2565-99(2008)
Заменен
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications — 4 стр.
ASTM D955-08
Заменен
Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics — 5 стр.
ASTM D648-07
Заменен
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position (Withdrawn 2016) — 13 стр.
ASTM D789-07e1
Заменен
Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA) — 7 стр.
ASTM D788-12
Заменен
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds — 6 стр.
ASTM D787-12
Заменен
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds — 4 стр.
ASTM D747-10
Отменен
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019) — 6 стр.
ASTM D707-09
Заменен
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds — 5 стр.
ASTM D2288-97(2001)
Отменен
Standard Test Method for Weight Loss of Plasticizers on Heating (Withdrawn 2010) — 3 стр.
ASTM D2583-07
Заменен
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor — 4 стр.
ASTM D2584-11
Заменен
Standard Test Method for Ignition Loss of Cured Reinforced Resins — 3 стр.
ASTM D2632-01(2008)
Заменен
Standard Test Method for Rubber Property—;Resilience by Vertical Rebound — 5 стр.
ASTM D395-03(2008)
Заменен
Standard Test Methods for Rubber Property—;Compression Set — 6 стр.
ASTM D573-04(2010)
Заменен
Standard Test Method for Rubber—;Deterioration in an Air Oven — 6 стр.
ASTM D1929-12
Заменен
Standard Test Method for Determining Ignition Temperature of Plastics — 5 стр.
ASTM D2843-10
Заменен
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics — 10 стр.
ASTM D2863-12e1
Заменен
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) — 14 стр.
ASTM D792-08
Заменен
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.
ASTM D1435-05
Заменен
Standard Practice for Outdoor Weathering of Plastics — 5 стр.
ASTM D1149-07(2012)
Заменен
Standard Test Methods for Rubber Deterioration—;Cracking in an Ozone Controlled Environment — 11 стр.
ASTM D1203-10
Заменен
Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods — 3 стр.
ASTM D1238-10
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 15 стр.
ASTM D1248-12
Заменен
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable — 9 стр.
ASTM D1505-10
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D1430-11
Заменен
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics — 7 стр.
ASTM D1434-82(2009)e1
Заменен
Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting — 13 стр.
ASTM D883-12
Заменен
Standard Terminology Relating to Plastics — 16 стр.
ASTM D695-10
Заменен
Standard Test Method for Compressive Properties of Rigid Plastics — 7 стр.
ASTM D150-11
Заменен
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation — 20 стр.
ASTM D1784-11
Заменен
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds — 4 стр.
ASTM D1822-06
Заменен
Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials — 10 стр.
ASTM D2116-07(2012)
Заменен
Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials — 5 стр.
ASTM D2137-11
Заменен
Standard Test Methods for Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics — 7 стр.
ASTM D2240-05(2010)
Заменен
Standard Test Method for Rubber Property—;Durometer Hardness — 13 стр.
ASTM D4895-10
Заменен
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion — 14 стр.
ASTM D2287-12
Заменен
Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds — 4 стр.
ASTM D1562-09
Заменен
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds — 5 стр.
ASTM D1600-08
Заменен
Standard Terminology for Abbreviated Terms Relating to Plastics — 10 стр.
ASTM D1693-12
Заменен
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics — 11 стр.
ASTM D1525-09
Заменен
Standard Test Method for Vicat Softening Temperature of Plastics — 10 стр.
ASTM D257-07
Заменен
Standard Test Methods for DC Resistance or Conductance of Insulating Materials — 18 стр.
ASTM D256-10
Заменен
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics — 20 стр.
ASTM D149-09
Заменен
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies — 13 стр.
ASTM D471-12a
Заменен
Standard Test Method for Rubber Property—;Effect of Liquids — 16 стр.
ASTM D638-10
Заменен
Standard Test Method for Tensile Properties of Plastics — 16 стр.
ASTM D635-10
Заменен
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position — 7 стр.
ASTM D624-00(2012)
Заменен
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers — 9 стр.
ASTM D412-06ae2
Заменен
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers<span class='unicode'>—;</span>Tension — 14 стр.
ASTM D495-99(2004)
Заменен
Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation (Withdrawn 2013) — 10 стр.
ASTM D570-98(2010)e1
Заменен
Standard Test Method for Water Absorption of Plastics — 4 стр.
ASTM D575-91(2012)
Заменен
Standard Test Methods for Rubber Properties in Compression — 4 стр.
ASTM D618-08
Заменен
Standard Practice for Conditioning Plastics for Testing — 4 стр.
ASTM D4976-12a
Заменен
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials — 8 стр.
ASTM D3915-06
Отменен
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015) — 4 стр.
ASTM D4894-07(2012)
Заменен
Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials — 14 стр.
ASTM D4812-11
Заменен
Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics — 12 стр.
ASTM D4804-09
Заменен
Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics — 6 стр.
ASTM D4745-11ae1
Заменен
Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials — 6 стр.
ASTM D4507-93a
Заменен
Specification for Thermoplastic Polyester (TPES) Materials (Withdrawn 1999) — 7 стр.
ASTM D4986-10
Заменен
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials — 6 стр.
ASTM D4617-03
Отменен
Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012) — 5 стр.
ASTM D4549-11
Заменен
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) — 5 стр.
ASTM D4474-00
Отменен
Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008) — 5 стр.
ASTM D4634-11a
Заменен
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) — 5 стр.
ASTM D3985-05(2010)e1
Заменен
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor — 7 стр.
ASTM D4349-10
Заменен
Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials — 5 стр.
ASTM D4329-05
Заменен
Standard Practice for Fluorescent UV Exposure of Plastics — 6 стр.
ASTM D4396-06
Заменен
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications (Withdrawn 2015) — 4 стр.
ASTM D3895-07
Заменен
Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry — 8 стр.
ASTM D3892-93(2009)
Заменен
Standard Practice for Packaging/Packing of Plastics — 2 стр.
ASTM D3801-10
Заменен
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position — 7 стр.
ASTM D3965-11
Заменен
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings — 4 стр.
ASTM D4101-11
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials — 18 стр.
ASTM D4181-00
Заменен
Standard Classification for Acetal (POM) Molding and Extrusion Materials (Withdrawn 2005) — 9 стр.
ASTM D4203-12
Заменен
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials — 7 стр.
ASTM D4364-05
Заменен
Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight — 4 стр.
ASTM D4020-11
Заменен
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials — 15 стр.
ASTM D4066-01a(2008)
Заменен
Standard Classification System for Nylon Injection and Extrusion Materials (PA) (Withdrawn 2012) — 19 стр.
ASTM D4067-11
Заменен
Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods — 5 стр.
ASTM D4216-06
Заменен
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds — 5 стр.
ASTM D3159-10
Заменен
Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials — 5 стр.
ASTM D3418-12e1
Заменен
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry — 7 стр.
ASTM D3275-08
Заменен
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials — 4 стр.
ASTM D3222-05(2010)
Заменен
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials — 5 стр.
ASTM D3350-12
Заменен
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 7 стр.
ASTM D3307-10
Заменен
Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials — 5 стр.
ASTM D3638-12
Заменен
Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials — 5 стр.
ASTM D3713-95
Отменен
Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame (Withdrawn 2000) — 7 стр.
ASTM D3763-10e1
Заменен
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors — 10 стр.
ASTM D2951-00
Отменен
Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006) — 3 стр.
ASTM D3012-07
Заменен
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven — 6 стр.
ASTM D5046-98
Заменен
Standard Specification for Fully Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000) — 4 стр.
ASTM F372-99(2003)
Отменен
Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique (Withdrawn 2009) — 6 стр.
ASTM D5279-08
Заменен
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion — 4 стр.
ASTM D5336-09
Заменен
Standard Specification for Polyphthalamide (PPA) Injection Molding Materials — 6 стр.
ASTM D5420-10
Заменен
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) — 8 стр.
ASTM D5476-99
Отменен
Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005) — 5 стр.
ASTM D5630-06
Заменен
Standard Test Method for Ash Content in Plastics — 5 стр.
ASTM D5676-99
Отменен
Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004) — 4 стр.
ASTM D5857-10
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology — 21 стр.
ASTM D5048-09
Заменен
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame — 7 стр.
ASTM D5205-10
Заменен
Standard Classification System for Polyetherimide (PEI) Materials — 7 стр.
ASTM D5204-11
Заменен
Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials — 7 стр.
ASTM D5203-07
Отменен
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Withdrawn 2016) — 4 стр.
ASTM D5138-11
Заменен
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) — 7 стр.
ASTM D5132-11
Заменен
Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles — 8 стр.
ASTM E1354-11b
Заменен
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter — 20 стр.
ASTM D5575-07
Заменен
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers — 12 стр.
ASTM D5593-99e1
Отменен
Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) — 4 стр.
ASTM D5628-10
Заменен
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) — 10 стр.
ASTM E662-13
Заменен
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials — 24 стр.
ASTM D6339-11
Заменен
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) — 6 стр.
ASTM D6338-10
Заменен
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods — 6 стр.
ASTM D6358-11
Заменен
Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods — 7 стр.
ASTM E162-12a
Заменен
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source — 11 стр.
ASTM D5927-09
Заменен
Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods — 10 стр.
ASTM D5990-00
Заменен
Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007) — 4 стр.
ASTM D6314-98
Заменен
Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002) — 3 стр.
ASTM D6360-07
Заменен
Standard Practice for Enclosed Carbon-Arc Exposures of Plastics — 4 стр.
ASTM D6394-11
Заменен
Standard Specification for Sulfone Plastics (SP) — 6 стр.
ASTM D6778-12
Заменен
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) — 7 стр.
ASTM D6779-12a
Заменен
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) — 14 стр.
ASTM D6835-08
Заменен
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) — 5 стр.
ASTM D6869-03(2011)
Заменен
Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) — 4 стр.
ASTM D7209-06
Отменен
Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015) — 6 стр.
ASTM E29-08
Заменен
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications — 5 стр.
ASTM E84-12c
Заменен
Standard Test Method for Surface Burning Characteristics of Building Materials — 22 стр.
ASTM E96/E96M-12
Заменен
Standard Test Methods for Water Vapor Transmission of Materials — 12 стр.
ASTM E104-02(2012)
Заменен
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions — 5 стр.
ASTM E119-09
Заменен
Standard Test Methods for Fire Tests of Building Construction and Materials — 31 стр.
ASTM D706-09
Заменен
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds — 5 стр.
ASTM D790-10
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 11 стр.
ASTM D785-08
Заменен
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials — 6 стр.
ASTM D1003-11e1
Заменен
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics — 7 стр.
ASTM D1499-05
Заменен
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics — 5 стр.
ASTM D569-90
Отменен
Method for Measuring the Flow Properties of Thermoplastic Molding Materials (Withdrawn 1995) — 4 стр.
ASTM D4673-02(2008)
Заменен
Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials — 7 стр.
ASTM D4000-13
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D4000-11
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.

На этот документ ссылаются

ASTM D4066-96
Заменен
Standard Classification System for Nylon Injection and Extrusion Materials (PA) — 18 стр.
ASTM D4065-06
Заменен
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures — 7 стр.
ASTM D4066-96ae1
Заменен
Standard Classification System for Nylon Injection and Extrusion Materials (PA) — 18 стр.
ASTM D4203-07
Заменен
Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials — 7 стр.
ASTM D7293-06
Заменен
Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) — 5 стр.
ASTM D7292-06
Заменен
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) — 5 стр.
ASTM D882-97
Заменен
Standard Test Method for Tensile Properties of Thin Plastic Sheeting — 9 стр.
ASTM D4976-12
Заменен
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials — 7 стр.
ASTM D6779-12
Заменен
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) — 14 стр.
ASTM F2026-10
Заменен
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications — 5 стр.
ASTM D1238-85
Заменен
Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer — 13 стр.
ASTM D1238-90b
Заменен
Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer — 9 стр.
ASTM D4101-82(1988)e1
Заменен
Standard Specification for Propylene Plastic Injection and Extrusion Materials — 7 стр.
ASTM D4066-01a(2008)
Заменен
Standard Classification System for Nylon Injection and Extrusion Materials (PA) (Withdrawn 2012) — 19 стр.
ASTM D4000-13
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D788-11
Заменен
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds — 6 стр.
ASTM D4000-11
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D7436-11
Заменен
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology — 6 стр.
ASTM D882-10
Заменен
Standard Test Method for Tensile Properties of Thin Plastic Sheeting — 10 стр.
ASTM D1004-09
Заменен
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting — 4 стр.
ASTM D2583-07
Заменен
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor — 4 стр.