Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM D4000-20

Заменен
Standard Classification System for Specifying Plastic Materials — 23 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM D2951-00
Отменен
Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006) — 3 стр.
ASTM D3895-19
Действует
Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry — 7 стр.
ASTM D3915-06
Отменен
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015) — 4 стр.
ASTM D495-22
Действует
Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation — 11 стр.
ASTM D569-90
Отменен
Method for Measuring the Flow Properties of Thermoplastic Molding Materials (Withdrawn 1995) — 4 стр.
ASTM D570-22
Действует
Standard Test Method for Water Absorption of Plastics — 4 стр.
ASTM D573-04(2019)
Действует
Standard Test Method for Rubber—;Deterioration in an Air Oven — 6 стр.
ASTM D575-91(2018)
Заменен
Standard Test Methods for Rubber Properties in Compression — 4 стр.
ASTM D618-21
Действует
Standard Practice for Conditioning Plastics for Testing — 4 стр.
ASTM D624-00(2020)
Действует
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers — 9 стр.
ASTM D635-22
Действует
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position — 8 стр.
ASTM D638-22
Действует
Standard Test Method for Tensile Properties of Plastics — 16 стр.
ASTM D648-18
Действует
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position — 14 стр.
ASTM D695-15
Заменен
Standard Test Method for Compressive Properties of Rigid Plastics — 8 стр.
ASTM D1248-16
Действует
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable — 9 стр.
ASTM D1430-22
Действует
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics — 6 стр.
ASTM D1434-82(2015)e1
Заменен
Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting — 13 стр.
ASTM D1435-20
Действует
Standard Practice for Outdoor Weathering of Plastics — 5 стр.
ASTM D1499-13(2021)
Действует
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics — 5 стр.
ASTM D1505-18
Действует
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D149-20
Действует
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies — 13 стр.
ASTM D150-22
Действует
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation — 20 стр.
ASTM D256-10(2018)
Заменен
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics — 20 стр.
ASTM D257-14(2021)e1
Действует
Standard Test Methods for DC Resistance or Conductance of Insulating Materials — 18 стр.
ASTM D395-18
Действует
Standard Test Methods for Rubber Property—;Compression Set — 8 стр.
ASTM D412-16(2021)
Действует
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension — 14 стр.
ASTM D471-16a(2021)
Действует
Standard Test Method for Rubber Property—Effect of Liquids — 16 стр.
ASTM D706-20
Действует
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) — 5 стр.
ASTM D747-10
Отменен
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019) — 6 стр.
ASTM D785-08(2015)
Заменен
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials — 6 стр.
ASTM D787-18
Действует
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds — 4 стр.
ASTM D788-16
Действует
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds — 6 стр.
ASTM D707-15(2023)
Действует
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) — 5 стр.
ASTM D789-19
Действует
Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions — 7 стр.
ASTM D790-17
Действует
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 12 стр.
ASTM D792-20
Действует
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.
ASTM D883-22
Заменен
Standard Terminology Relating to Plastics — 17 стр.
ASTM D955-21
Действует
Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics — 9 стр.
ASTM D1003-21
Действует
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics — 7 стр.
ASTM D1149-18
Действует
Standard Test Methods for Rubber Deterioration—;Cracking in an Ozone Controlled Environment — 14 стр.
ASTM D1203-22
Заменен
Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods — 4 стр.
ASTM D1238-23
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 19 стр.
ASTM D1525-17e1
Действует
Standard Test Method for Vicat Softening Temperature of Plastics — 11 стр.
ASTM D1562-22
Действует
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) — 5 стр.
ASTM D1600-18
Отменен
Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) — 11 стр.
ASTM D1693-21
Действует
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics — 11 стр.
ASTM D1784-20
Действует
Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds — 4 стр.
ASTM D1822-21
Действует
Standard Test Method for Determining the Tensile-Impact Resistance of Plastics — 10 стр.
ASTM D1929-20
Заменен
Standard Test Method for Determining Ignition Temperature of Plastics — 6 стр.
ASTM D4329-21
Действует
Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics — 6 стр.
ASTM D3965-21
Действует
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings — 4 стр.
ASTM F372-99(2003)
Отменен
Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique (Withdrawn 2009) — 6 стр.
ASTM D5857-17
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology — 20 стр.
ASTM D5927-17
Действует
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods — 10 стр.
ASTM D5990-20a
Действует
Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK) — 5 стр.
ASTM D6314-98
Заменен
Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002) — 3 стр.
ASTM D6338-17
Действует
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods — 6 стр.
ASTM D4895-18
Заменен
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion — 14 стр.
ASTM D4976-12a(2020)
Действует
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials — 8 стр.
ASTM D4745-19
Заменен
Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods — 6 стр.
ASTM D4986-22
Действует
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials — 7 стр.
ASTM D5021-00
Отменен
Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007) — 4 стр.
ASTM D5046-98
Заменен
Standard Specification for Fully Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000) — 4 стр.
ASTM D5048-20a
Действует
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame — 10 стр.
ASTM D5132-20
Действует
Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles — 8 стр.
ASTM D5138-23
Действует
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) — 7 стр.
ASTM D5203-07
Отменен
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Withdrawn 2016) — 4 стр.
ASTM D5204-22
Действует
Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials — 8 стр.
ASTM D5205-16
Заменен
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials — 7 стр.
ASTM D5279-21
Действует
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion — 4 стр.
ASTM D5336-22
Действует
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials — 8 стр.
ASTM D4396-22
Действует
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications — 4 стр.
ASTM D4474-00
Отменен
Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008) — 5 стр.
ASTM D4549-15(2021)
Действует
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) — 5 стр.
ASTM D4617-03
Отменен
Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012) — 5 стр.
ASTM D4634-16(2022)
Действует
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) — 5 стр.
ASTM D4673-23
Действует
Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials — 8 стр.
ASTM D4364-13(2022)e1
Действует
Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight — 6 стр.
ASTM D5476-99
Отменен
Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005) — 5 стр.
ASTM D5575-18(2023)
Действует
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers — 12 стр.
ASTM D5593-99e1
Отменен
Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) — 4 стр.
ASTM D5628-18
Заменен
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) — 10 стр.
ASTM D5630-22
Действует
Standard Test Method for Ash Content in Plastics — 5 стр.
ASTM D5676-99
Отменен
Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004) — 4 стр.
ASTM D4349-22
Действует
Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials — 7 стр.
ASTM D4804-23
Действует
Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics — 6 стр.
ASTM D4812-19e1
Действует
Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics — 12 стр.
ASTM D4894-19
Заменен
Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials — 14 стр.
ASTM D2116-16(2021)
Действует
Standard Specification for FEP Resin Molding and Extrusion Materials — 5 стр.
ASTM D2137-11(2018)
Действует
Standard Test Methods for Rubber Property—;Brittleness Point of Flexible Polymers and Coated Fabrics — 7 стр.
ASTM D2240-15(2021)
Действует
Standard Test Method for Rubber Property—Durometer Hardness — 13 стр.
ASTM D2287-19
Действует
Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds — 4 стр.
ASTM D2288-97(2001)
Отменен
Standard Test Method for Weight Loss of Plasticizers on Heating (Withdrawn 2010) — 3 стр.
ASTM D2565-16
Заменен
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications — 7 стр.
ASTM D2583-13a
Заменен
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022) — 4 стр.
ASTM D2584-18
Действует
Standard Test Method for Ignition Loss of Cured Reinforced Resins — 3 стр.
ASTM D2632-15(2019)
Действует
Standard Test Method for Rubber Property—;Resilience by Vertical Rebound — 5 стр.
ASTM D2843-22
Действует
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics — 9 стр.
ASTM D2863-19
Заменен
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) — 15 стр.
ASTM D3012-19
Действует
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven — 7 стр.
ASTM D3159-22
Действует
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials — 6 стр.
ASTM D3222-21
Действует
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials — 5 стр.
ASTM D3275-18
Заменен
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials — 4 стр.
ASTM D3307-21
Действует
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials — 6 стр.
ASTM D3350-21
Заменен
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials — 8 стр.
ASTM D3418-21
Действует
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry — 8 стр.
ASTM D3638-21e1
Действует
Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials — 6 стр.
ASTM D3713-95
Отменен
Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame (Withdrawn 2000) — 7 стр.
ASTM D3763-18
Заменен
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors — 10 стр.
ASTM D3801-20a
Действует
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position — 9 стр.
ASTM D3892-15(2020)
Действует
Standard Practice for Packaging/Packing of Plastics — 2 стр.
ASTM D5420-21
Действует
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) — 9 стр.
ASTM D4507-93a
Заменен
Specification for Thermoplastic Polyester (TPES) Materials (Withdrawn 1999) — 7 стр.
ASTM D6339-11(2019)
Действует
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) — 6 стр.
ASTM D6358-19e1
Действует
Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods — 8 стр.
ASTM D6360-15(2021)
Действует
Standard Practice for Enclosed Carbon-Arc Exposures of Plastics — 4 стр.
ASTM D6394-21a
Действует
Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) — 8 стр.
ASTM D6778-20
Действует
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) — 7 стр.
ASTM D6779-21
Заменен
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) — 14 стр.
ASTM D6835-17
Заменен
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) — 5 стр.
ASTM D6869-17
Действует
Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) — 4 стр.
ASTM D7209-06
Отменен
Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015) — 6 стр.
ASTM E29-22
Действует
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications — 5 стр.
ASTM E84-23
Заменен
Standard Test Method for Surface Burning Characteristics of Building Materials — 27 стр.
ASTM E96/E96M-22ae1
Заменен
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials — 16 стр.
ASTM E104-20a
Действует
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions — 5 стр.
ASTM E119-22
Заменен
Standard Test Methods for Fire Tests of Building Construction and Materials — 36 стр.
ASTM E162-22
Заменен
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source — 12 стр.
ASTM E662-21ae1
Действует
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials — 26 стр.
ASTM E1354-22c
Заменен
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter — 27 стр.
ASTM D3985-17
Заменен
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor — 7 стр.
ASTM D4020-18
Действует
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials — 15 стр.
ASTM D3935-21
Действует
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material — 7 стр.
ASTM D4066-13(2019)
Действует
Standard Classification System for Nylon Injection and Extrusion Materials (PA) — 17 стр.
ASTM D4067-23
Действует
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods — 6 стр.
ASTM D4101-17e1
Заменен
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials — 17 стр.
ASTM D4181-00
Заменен
Standard Classification for Acetal (POM) Molding and Extrusion Materials (Withdrawn 2005) — 9 стр.
ASTM D4203-17
Действует
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials — 8 стр.
ASTM D4216-22
Действует
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds — 5 стр.
ASTM D4000-23
Действует
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D4000-16
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.

На этот документ ссылаются

ASTM D6394-20
Заменен
Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) — 8 стр.
ASTM D6394-21
Заменен
Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) — 8 стр.
ASTM F2820-12
Заменен
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications — 6 стр.
ASTM D4549-15
Заменен
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) — 5 стр.
ASTM D618-13
Заменен
Standard Practice for Conditioning Plastics for Testing — 4 стр.
ASTM D3965-16
Заменен
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings — 4 стр.
ASTM F3091/F3091M-14
Заменен
Standard Specification for Powder Bed Fusion of Plastic Materials — 6 стр.
ASTM D3935-15
Заменен
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material — 7 стр.
ASTM D7032-17
Заменен
Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails — 10 стр.
ASTM D2673-14
Заменен
Standard Specification for Oriented Polypropylene Film — 4 стр.
ASTM D6261-14
Заменен
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) — 6 стр.
ASTM D4349-16
Заменен
Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials — 7 стр.
ASTM F1499-17
Заменен
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) — 9 стр.
ASTM D4634-16
Заменен
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) — 5 стр.
ASTM D1562-15
Заменен
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) — 5 стр.
ASTM D5336-15a
Заменен
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material — 7 стр.
ASTM D5336-21
Заменен
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials — 7 стр.
ASTM D5204-19
Заменен
Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials — 8 стр.
ASTM D4673-16
Заменен
Standard Classification System for and Basis for Specification for Acrylonitrile–;Butadiene–;Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials — 7 стр.
ASTM D4067-16
Заменен
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods — 5 стр.
ASTM D5138-16
Заменен
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) — 7 стр.
ASTM D4067-21
Заменен
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods — 6 стр.
ASTM D707-15
Заменен
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) — 5 стр.
ASTM D6779-20
Заменен
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) — 15 стр.
ASTM D6779-21
Заменен
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) — 14 стр.
ASTM D1238-20
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 17 стр.
ASTM D6713-19
Заменен
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) — 5 стр.
ASTM D4000-16
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D952-15
Заменен
Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials — 3 стр.
ASTM D1004-13
Заменен
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting — 4 стр.
ASTM D4093-95(2014)
Заменен
Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials — 11 стр.
ASTM D638-14
Заменен
Standard Test Method for Tensile Properties of Plastics — 17 стр.
ASTM D1822-13
Заменен
Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials — 11 стр.
ASTM D2582-16
Заменен
Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting — 5 стр.
ASTM D4473-08(2016)
Заменен
Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior — 5 стр.
ASTM D5045-14
Заменен
Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials — 10 стр.
ASTM D4000-23
Действует
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D8033-16
Заменен
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials — 7 стр.