Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM D4101-14

Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials — 17 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM D3641-15
Заменен
Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials — 10 стр.
ASTM D2990-09
Заменен
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics — 20 стр.
ASTM D495-14
Заменен
Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation — 10 стр.
ASTM D523-14
Заменен
Standard Test Method for Specular Gloss — 5 стр.
ASTM C177-13
Заменен
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus — 23 стр.
ASTM D149-09(2013)
Заменен
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies — 13 стр.
ASTM D150-11
Заменен
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation — 20 стр.
ASTM D257-14
Заменен
Standard Test Methods for DC Resistance or Conductance of Insulating Materials — 18 стр.
ASTM D256-10e1
Заменен
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics — 20 стр.
ASTM D6110-10
Заменен
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics — 17 стр.
ASTM D570-98(2010)e1
Заменен
Standard Test Method for Water Absorption of Plastics — 4 стр.
ASTM D618-13
Заменен
Standard Practice for Conditioning Plastics for Testing — 4 стр.
ASTM D5947-11
Заменен
Standard Test Methods for Physical Dimensions of Solid Plastics Specimens — 10 стр.
ASTM D5740-11
Заменен
Standard Guide for Writing Material Standards in the Classification D4000 Format — 5 стр.
ASTM D5279-13
Заменен
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion — 4 стр.
ASTM D4812-11
Заменен
Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics — 12 стр.
ASTM E831-14
Заменен
Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis — 5 стр.
ASTM D7209-06
Отменен
Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015) — 6 стр.
ASTM D6290-13
Заменен
Standard Test Method for Color Determination of Plastic Pellets — 5 стр.
ASTM D696-08e1
Заменен
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −;30°C and 30°C with a Vitreous Silica Dilatometer — 5 стр.
ASTM D695-15
Заменен
Standard Test Method for Compressive Properties of Rigid Plastics — 8 стр.
ASTM D648-07
Заменен
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position (Withdrawn 2016) — 13 стр.
ASTM D638-14
Заменен
Standard Test Method for Tensile Properties of Plastics — 17 стр.
ASTM D635-14
Заменен
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position — 7 стр.
ASTM D543-14
Заменен
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents — 7 стр.
ASTM D3418-15
Заменен
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry — 7 стр.
ASTM D3012-13
Заменен
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven — 6 стр.
ASTM D3763-15
Заменен
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors — 10 стр.
ASTM D3801-10
Заменен
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position — 7 стр.
ASTM D3835-08
Заменен
Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer — 11 стр.
ASTM D3892-15
Заменен
Standard Practice for Packaging/Packing of Plastics — 2 стр.
ASTM D4000-13
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D4329-13
Заменен
Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics — 6 стр.
ASTM D4364-13
Заменен
Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight — 6 стр.
ASTM D4805-88(1994)e1
Отменен
Standard Terminology for Plastics Standards (Withdrawn 2002) — 2 стр.
ASTM D5420-10
Заменен
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) — 8 стр.
ASTM D5630-13
Заменен
Standard Test Method for Ash Content in Plastics (Withdrawn 2022) — 5 стр.
ASTM D785-08(2015)
Заменен
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials — 6 стр.
ASTM E29-13
Заменен
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications — 5 стр.
ASTM E313-15e1
Заменен
Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates — 6 стр.
ASTM D732-10
Заменен
Standard Test Method for Shear Strength of Plastics by Punch Tool — 4 стр.
ASTM D746-14
Заменен
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact — 7 стр.
ASTM D790-15e2
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 12 стр.
ASTM D792-13
Заменен
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.
ASTM D883-12e1
Заменен
Standard Terminology Relating to Plastics — 16 стр.
ASTM D1238-13
Заменен
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 16 стр.
ASTM D1435-13
Заменен
Standard Practice for Outdoor Weathering of Plastics — 5 стр.
ASTM D1505-10
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D1525-09
Заменен
Standard Test Method for Vicat Softening Temperature of Plastics — 10 стр.
ASTM D1531-06
Отменен
Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures (Withdrawn 2012) — 11 стр.
ASTM D1600-14
Заменен
Standard Terminology for Abbreviated Terms Relating to Plastics — 11 стр.
ASTM D1822-13
Заменен
Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials — 11 стр.
ASTM D2117-82(1988)e1
Отменен
Standard Test Method for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method (Withdrawn 1994) — 5 стр.
ASTM D2240-15
Заменен
Standard Test Method for Rubber Property—;Durometer Hardness — 13 стр.
ASTM D2565-99(2008)
Заменен
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications — 4 стр.
ASTM D2584-11
Заменен
Standard Test Method for Ignition Loss of Cured Reinforced Resins — 3 стр.
ASTM D2863-13
Заменен
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) — 14 стр.
ASTM D4101-14e1
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials — 17 стр.
ASTM D4101-11
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials — 18 стр.

На этот документ ссылаются

ASTM F2764-11ae1
Действует
Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 8 стр.
ASTM F2736-13
Заменен
Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe — 7 стр.
ASTM F2881-11
Заменен
Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications — 8 стр.
ASTM F1545-97(2009)
Заменен
Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges — 8 стр.
ASTM F1545-15
Заменен
Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges — 8 стр.
ASTM D7254-07
Заменен
Standard Specification for Polypropylene (PP) Siding — 4 стр.
ASTM D2673-09
Заменен
Standard Specification for Oriented Polypropylene Film — 4 стр.
ASTM F1412-09
Заменен
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems — 7 стр.
ASTM D4101-14e1
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials — 17 стр.
ASTM D4101-11
Заменен
Standard Specification for Polypropylene Injection and Extrusion Materials — 18 стр.
ASTM F2764/F2764M-11ae1
Заменен
Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications — 8 стр.
ASTM F2389-10
Заменен
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems — 9 стр.
ASTM D4000-13
Заменен
Standard Classification System for Specifying Plastic Materials — 22 стр.
ASTM D790-10
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 11 стр.
ASTM D790-15
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 12 стр.
ASTM D790-15e1
Заменен
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 12 стр.