This guide covers the selection and use of procedures for testing water-reducible coatings, both pigmented and clear, utilizing synthetic latices, synthetic resin emulsions, or water-reducible alkyds. This guide covers the testing of liquid coatings as applied by conventional spray, airless spray, electrostatic spray, dip, fancoat, flowcoat, roller coat, and curtain coat.

Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, this guide was withdrawn in January 2014 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

This compilation of standards is intended to provide assistance in selecting appropriate tests for evaluating water-reducible coatings and for determining what characteristics should be considered for a given end use. Either single-coat operations or multicoat systems may be addressed by the proper selection of tests. Results from the various tests are not all necessarily useful in evaluating the performance of different systems for various end uses. The list can be useful to those developing coatings and coating systems and to those seeking coating systems for products.

1.1 This guide covers the selection and use of procedures for testing water-reducible coatings, both pigmented and clear, utilizing synthetic latices, synthetic resin emulsions, or water-reducible alkyds. The methods included are listed in Table 1. Where more than one standard is listed for the same characteristic, no attempt is made to indicate superiority of one standard over another. Selection of the standards to be followed must be governed by experience and the requirements in each individual case, together with agreement between producer and user.

1.2 This guide covers the testing of liquid coatings as applied by conventional spray, airless spray, electrostatic spray, dip, fancoat, flowcoat, roller coat, and curtain coat.

1.3 This guide includes procedures relating to proper and safe packaging, shipping and receiving, and storage and handling during use and application.

1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.