This specification covers crushed steel slag coarse and fine aggregates suitable for use in bituminous paving mixtures. The coarse and fine aggregates shall consist of hard, tough, durable pieces of steel slag, and shall be processed, as necessary, by crushing or screening, or both, and magnetic separation for the removal of metallics. At the time of delivery, the aggregates shall not contain injurious amounts of foreign materials such as clay, loam, wood, tramp metal, unhydrated lime, or other deleterious materials. The physical requirements for which the aggregates shall be tested on and consequently conform to are grading and fineness modulus, polishing characteristics, soundness, degradation, expansion, friable particles, stripping, adherent coatings, crushed count, plasticity index, leaching; and environmental stability.

1.1 This specification covers crushed steel slag coarse and fine aggregates suitable for use in bituminous paving mixtures.

1.2 Steel slag coarse and fine aggregates are currently being used entirely (Note 1) or combined with other mineral aggregates, such as those covered in Specification D692 or D1073, to produce paving mixtures similar to those described in Specification D3515 or D4215.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.