The test method is used to estimate the permanganate natural oxidant demand exerted by the soil or aquifer solids by determining the quantity of potassium permanganate that is consumed by naturally occurring species as a function of time. Typically the measurement of PNOD is used to screen potential sites for in situ chemical oxidation (ISCO) with permanganate (Test Method A) and provide information to aid in the design of remediation systems (Test Method B).

While some oxidizable species react relatively quickly (that is, days to weeks), others react more slower (weeks to months). Consequently, the PNOD_t is expected to be some fraction of the PNOD_max.

Due to mass transport related issues at the field-scale it is reasonable to assume that the PNOD_t measured using the test method may overestimate the demand exerted during ISCO applications.

Note 1—The quality of the result produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D 3740 are generally considered capable of competent and objective testing/sampling/inspection/and so forth.

1.1 This test method covers the estimation of the permanganate natural oxidant demand (PNOD) through the determination of the quantity of potassium permanganate (KMnO4) that organic matter and other naturally occurring oxidizable species present in soil or aquifer solids will consume under specified conditions as a function of time. Oxidizable species may include organic constituents and oxidizable inorganic ions, such as ferrous iron and sulfides. The following test methods are included:

1.2 This test method is limited by the reagents employed to a permanganate natural oxidant demand (PNOD) of 60 g KMnO4 per kg soil or aquifer solids after a period of 48 hours (Method A) or two weeks (Method B).

1.3 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D 6026.

1.4 Units - The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to interpret the results of the data. It is the responsibility of the user of this standard to interpret the results obtained and to determine the applicability of these results prior to use.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.