Water absorptiveness through the surface of an overlaid panel is a function of various characteristics of the overlay and substrate, including overlay resin content, thickness of the overlay, porosity, and permeability.

This test method is useful in comparing the water absorption characteristics of different overlaid panel products. The results from this test method are influenced by both the performance of the overlay system and the panel substrate. Therefore, the results are appropriate for comparison of the relative performance of an overlay system when tested over similar or matched panel substrates.

Note 1—Panel attributes that may influence water absorption include, but are not limited to, panel type, wood species, face veneer thickness and grade, preoverlay surface treatment such as sanding, particle geometry and compaction ratio.

1.1 This test method covers the determination of the quantity of water absorbed in a specified time through the surface of an overlaid wood-based panel. The test method measures the rate of water weight gain within a controlled surface area of the overlaid panel surface when exposed to standing water. The method was adapted from the principles of Test Method D 5795.

1.2 This test method is applicable to various overlaid wood-based panels including, but not limited to, plywood (such as MDO and HDO referenced in PS 1–07), oriented strand board, medium density fiberboard, particleboard, and hardboard.

1.3 This test method does not address sampling procedures, number of replications nor performance criteria since those details vary depending upon the purpose of the testing and the type of product. The method is specific to the panel surface and does not evaluate water absorption or edge swell that may occur along panel edges. The method does not consider the variables related to in-service moisture conditions and therefore does not claim to directly relate to water absorption that may occur in actual panel use situations.

1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.