Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM D792-20

Действует
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM E691-23
Действует
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method — 23 стр.
ASTM D4968-19a
Действует
Standard Practice for Annual Review of Test Methods and Specifications for Plastics — 15 стр.
ASTM D6436-14(2022)
Действует
Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers — 4 стр.
ASTM E1-14(2020)
Действует
Standard Specification for ASTM ;Liquid-in-Glass Thermometers — 51 стр.
ASTM E12-70(1991)e01
Заменен
Terminology Relating to Density and Specific Gravity of Solids, Liquids, and Gases (Withdrawn 1996) — 3 стр.
ASTM D618-21
Действует
Standard Practice for Conditioning Plastics for Testing — 4 стр.
ASTM D891-24
Действует
Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals — 5 стр.
ASTM D792-13
Заменен
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.

На этот документ ссылаются

ASTM F2854-10(2016)
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 4 стр.
ASTM F2025-06(2018)
Действует
Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment — 7 стр.
ASTM D5687/D5687M-95(2015)
Заменен
Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation — 16 стр.
ASTM D7136/D7136M-15
Заменен
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event — 16 стр.
ASTM E285-08(2020)
Действует
Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials — 6 стр.
ASTM F2854-20
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 5 стр.
ASTM F2785-18a
Заменен
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings — 14 стр.
ASTM D3295-15
Заменен
Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing — 7 стр.
ASTM D3222-18a
Заменен
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials — 5 стр.
ASTM D704-99(2012)
Заменен
Standard Specification for Melamine-Formaldehyde Molding Compounds — 3 стр.
ASTM D5436-15
Заменен
Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes — 4 стр.
ASTM D705-99(2012)
Заменен
Standard Specification for Urea-Formaldehyde Molding Compounds — 2 стр.
ASTM D6394-20
Заменен
Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) — 8 стр.
ASTM F2953-12
Заменен
Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages — 7 стр.
ASTM D7914/D7914M-14
Заменен
Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations — 7 стр.
ASTM E990-13
Заменен
Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels — 7 стр.
ASTM D7078/D7078M-20
Заменен
Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method — 15 стр.
ASTM F2785-20
Заменен
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings — 12 стр.
ASTM F648-14
Заменен
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants — 8 стр.
ASTM D6394-21
Заменен
Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) — 8 стр.
ASTM F2820-12
Заменен
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications — 6 стр.
ASTM F2854-20a
Заменен
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing — 5 стр.
ASTM F2848-17
Заменен
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns — 5 стр.
ASTM F2785-20e1
Заменен
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings — 12 стр.
ASTM D7205/D7205M-06(2016)
Заменен
Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars — 13 стр.
ASTM D2116-16
Заменен
Standard Specification for FEP Resin Molding and Extrusion Materials — 5 стр.
ASTM D4549-15
Заменен
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) — 5 стр.
ASTM D3307-16
Заменен
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials — 6 стр.
ASTM D3222-20
Заменен
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials — 5 стр.
ASTM D3965-16
Заменен
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings — 4 стр.
ÖNORM EN ISO 21809-1:2019-05
Действует
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)
ÖNORM EN ISO 23936-1:2009-08
Действует
Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
ASTM A974-97(2016)
Заменен
Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) — 7 стр.
ASTM D1710-15
Заменен
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes — 6 стр.
ASTM F1545-15a
Заменен
Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges — 9 стр.
ASTM F2929-17
Заменен
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig — 10 стр.
ASTM D3935-15
Заменен
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material — 7 стр.
ASTM D6248-98(2012)e1
Заменен
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021) — 3 стр.
ASTM C1115-17
Заменен
Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories — 5 стр.
ASTM F2805-16
Заменен
Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections — 8 стр.
ASTM F3123-18a
Заменен
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) — 14 стр.
ASTM D3851-17
Заменен
Standard Specification for Microcellular Polyurethane Shoe Soling Materials — 3 стр.
ASTM D3368-17
Заменен
Standard Specification for FEP Sheet and Film — 6 стр.
ASTM D1201-13
Заменен
Standard Specification for Thermosetting Polyester Molding Compounds — 3 стр.
ASTM D3159-20
Заменен
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials — 6 стр.
ASTM D6415/D6415M-06a(2013)
Заменен
Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite — 10 стр.
ASTM D5448/D5448M-16
Заменен
Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders — 13 стр.
ASTM D5450/D5450M-16
Заменен
Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders — 9 стр.
ASTM D5449/D5449M-16
Заменен
Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders — 10 стр.
ASTM D3308-12(2017)
Заменен
Standard Specification for PTFE Resin Skived Tape — 3 стр.
ASTM F510/F510M-20
Действует
Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method — 7 стр.
ASTM D7791-17
Заменен
Standard Test Method for Uniaxial Fatigue Properties of Plastics — 5 стр.
ASTM D4349-16
Заменен
Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials — 7 стр.
ASTM D3294-15
Заменен
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes — 6 стр.
ASTM D7774-17
Заменен
Standard Test Method for Flexural Fatigue Properties of Plastics — 6 стр.
ASTM D3485-15
Заменен
Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC) — 6 стр.
ASTM D1562-15
Заменен
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) — 5 стр.
ASTM D1593-19
Заменен
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting — 4 стр.
ASTM F2160-22
Заменен
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — 7 стр.
ASTM F2160-16
Заменен
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — 7 стр.
ASTM D5336-15a
Заменен
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material — 7 стр.
ASTM D5336-21
Заменен
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials — 7 стр.
ASTM E1612/E1612M-94(2017)
Заменен
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures — 5 стр.
ASTM D6495/D6495M-18
Заменен
Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners — 4 стр.
ASTM D5889/D5889M-18
Заменен
Standard Practice for Quality Control of Geosynthetic Clay Liners — 3 стр.
ASTM D7176-06(2018)
Заменен
Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications — 5 стр.
ASTM D4976-12a
Заменен
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials — 8 стр.
ASTM D5204-19
Заменен
Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials — 8 стр.
ASTM D7291/D7291M-15
Заменен
Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material — 12 стр.
ASTM F3131-14
Заменен
Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages — 6 стр.
ASTM D6248-21
Действует
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry — 3 стр.
ASTM D6645-18
Действует
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry — 4 стр.
ASTM F790-18
Заменен
Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures — 3 стр.
ASTM D4255/D4255M-20
Заменен
Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method — 14 стр.
ASTM D4067-16
Заменен
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods — 5 стр.
ASTM D4067-21
Заменен
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods — 6 стр.
ASTM D707-15
Заменен
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) — 5 стр.
ASTM F702-18
Действует
Standard Specification for Polysulfone Resin for Medical Applications — 4 стр.
ASTM D6779-20
Заменен
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) — 15 стр.
ASTM D6779-21
Заменен
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) — 14 стр.
ASTM D705-99(2020)
Действует
Standard Specification for Urea-Formaldehyde Molding Compounds — 2 стр.
ASTM D1201-13(2022)e1
Действует
Standard Specification for Thermosetting Polyester Molding Compounds — 3 стр.
ASTM D7211-13(2018)
Заменен
Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use — 4 стр.
ASTM D6264/D6264M-17
Заменен
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force — 12 стр.
ASTM D4895-18
Заменен
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion — 14 стр.
ASTM D5977-15
Заменен
Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures — 5 стр.
ASTM F942-18
Заменен
Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures — 2 стр.
ASTM D7766/D7766M-16
Заменен
Standard Practice for Damage Resistance Testing of Sandwich Constructions — 9 стр.
ASTM D7137/D7137M-17
Заменен
Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates — 16 стр.
ASTM F2818-10(2019)
Заменен
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing — 7 стр.
ASTM F2026-23
Действует
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications — 5 стр.
ASTM F3131-14(2023)
Действует
Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages — 6 стр.
ASTM F2026-17
Заменен
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications — 5 стр.
ASTM D3851-17(2022)
Действует
Standard Specification for Microcellular Polyurethane Shoe Soling Materials — 3 стр.
ASTM F2896-11(2017)
Заменен
Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids — 9 стр.
ASTM F2042-18
Действует
Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—;Crosslinking and Fabrication — 7 стр.
ASTM F648-21
Действует
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants — 9 стр.
ASTM D7248/D7248M-12(2017)
Заменен
Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens — 32 стр.
ASTM D7248/D7248M-21
Заменен
Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens — 24 стр.
ASTM D6742/D6742M-17
Заменен
Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates — 8 стр.