Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM D883-17

Заменен
Standard Terminology Relating to Plastics — 16 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM D747-10
Отменен
Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019) — 6 стр.
ASTM D1003-13
Заменен
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics — 7 стр.
ASTM D790-17
Действует
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 12 стр.
ASTM D882-18
Действует
Standard Test Method for Tensile Properties of Thin Plastic Sheeting — 12 стр.
ASTM D907-15
Заменен
Standard Terminology of Adhesives — 13 стр.
ASTM E308-18
Заменен
Standard Practice for Computing the Colors of Objects by Using the CIE System — 45 стр.
ASTM D1566-15
Заменен
Standard Terminology Relating to Rubber — 17 стр.
ASTM D638-14
Заменен
Standard Test Method for Tensile Properties of Plastics — 17 стр.
ASTM C162-05(2015)
Заменен
Standard Terminology of<brk type="line"/> Glass and Glass Products — 16 стр.
ASTM D4703-16
Действует
Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets — 13 стр.
ASTM D883-18
Заменен
Standard Terminology Relating to Plastics — 16 стр.
ASTM D883-12e1
Заменен
Standard Terminology Relating to Plastics — 16 стр.

На этот документ ссылаются

BS ISO 15840:2004
Действует
Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications — 42 стр.
BS ISO 10575:2012
Действует
Resilient floor coverings. Specification for rubber sheet floor coverings with backing — 16 стр.
BS ISO 10577:2012
Действует
Resilient floor coverings. Specification for rubber sheet floor coverings without back — 16 стр.
BS ISO 23559:2011
Действует
Plastics. Film and sheeting. Guidance on the testing of thermoplastic films — 16 стр.
BS ISO 12891-2:2014
Действует
Retrieval and analysis of surgical implants. Analysis of retrieved surgical implants — 38 стр.
ASTM E1749-10
Заменен
Standard Terminology Relating to Rigid Wall Relocatable Shelters — 8 стр.
ASTM E1067/E1067M-11
Заменен
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels — 16 стр.
ASTM F2433-05(2013)
Заменен
Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness — 6 стр.
ASTM F1714-96(2013)
Заменен
Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices — 8 стр.
ASTM F732-00(2011)
Заменен
Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses — 11 стр.
ASTM F3009-14
Заменен
Standard Specification for Polyolefin Composition Floor Tile — 4 стр.
ASTM F1488-14
Заменен
Standard Specification for Coextruded Composite Pipe — 12 стр.
ASTM D5422-09
Заменен
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer — 7 стр.
ASTM D648-16
Заменен
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position — 14 стр.
ASTM D5477-11
Заменен
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) — 4 стр.
ASTM D2838-09e1
Заменен
Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting (Withdrawn 2018) — 5 стр.
ASTM D787-12
Заменен
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds — 4 стр.
ASTM D1505-10
Заменен
Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.
ASTM D5592-94(2010)
Заменен
Standard Guide for Material Properties Needed in Engineering Design Using Plastics — 6 стр.
ASTM D3039/D3039M-14
Заменен
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials — 13 стр.
ASTM D7192-10
Заменен
Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors — 8 стр.
ASTM D7292-12
Заменен
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) — 6 стр.
ASTM D5813-04(2012)
Заменен
Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems — 4 стр.
ASTM D6110-10
Заменен
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics — 17 стр.
ASTM D882-12
Заменен
Standard Test Method for Tensile Properties of Thin Plastic Sheeting — 11 стр.
ASTM D3014-11
Заменен
Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position — 5 стр.
ASTM D6100-14
Заменен
Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes &#40;POM&#41; — 6 стр.
ASTM D5989-14a
Заменен
Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon &#40;PA&#41; — 7 стр.
ASTM D3299-10
Заменен
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks — 17 стр.
ASTM D3045-92(2010)
Заменен
Standard Practice for Heat Aging of Plastics Without Load — 5 стр.
ASTM D5526-12
Заменен
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions — 6 стр.
ASTM D4020-11
Заменен
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials — 15 стр.
ASTM D5511-12
Заменен
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions — 7 стр.
ASTM D1708-13
Заменен
Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens — 5 стр.
ASTM D1601-12
Заменен
Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers — 6 стр.
ASTM D2305-10
Заменен
Standard Test Methods for Polymeric Films Used for Electrical Insulation — 8 стр.
ASTM D6456-10
Заменен
Standard Specification for Finished Parts Made from Polyimide Resin — 4 стр.
ASTM D6290-13
Заменен
Standard Test Method for Color Determination of Plastic Pellets — 5 стр.
ASTM D6338-10
Заменен
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods — 6 стр.
ASTM D4097-01(2010)
Заменен
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks — 16 стр.
ASTM D5048-14
Заменен
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame — 7 стр.
ASTM D5988-12
Заменен
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil — 6 стр.
ASTM D4754-11
Заменен
Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell — 5 стр.
ASTM D7617/D7617M-11
Заменен
Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars — 12 стр.
ASTM D7444-11
Заменен
Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics — 6 стр.
ASTM D6343-14
Заменен
Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications — 5 стр.
ASTM D1525-17
Заменен
Standard Test Method for Vicat Softening Temperature of Plastics — 11 стр.
ASTM D3222-05(2015)
Заменен
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials — 5 стр.
ASTM D6110-17
Заменен
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics — 17 стр.
ASTM D3222-18
Заменен
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials — 5 стр.
ASTM D789-15
Заменен
Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA) — 7 стр.
ASTM D7444-18
Заменен
Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics — 6 стр.
ASTM C923M-08b(2013)
Заменен
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) — 3 стр.
ASTM C1478-08(2013)
Заменен
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals — 3 стр.
ASTM C1478M-08a(2013)
Заменен
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) — 3 стр.
ASTM C1644-06(2011)
Заменен
Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes — 5 стр.
ASTM C923-08(2013)e1
Заменен
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals — 4 стр.
ASTM D7290-06(2011)
Заменен
Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications — 4 стр.
ASTM D731-10
Заменен
Standard Test Method for Molding Index of Thermosetting Molding Powder — 4 стр.
ASTM E2740-12e1
Заменен
Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing — 6 стр.
ASTM E2639-12
Заменен
Standard Test Method for Blast Resistance of Trash Receptacles — 11 стр.
ASTM D4969-07(2012)
Заменен
Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric — 4 стр.
ASTM D7193-11
Заменен
Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape — 4 стр.
ASTM D3308-12
Заменен
Standard Specification for PTFE Resin Skived Tape — 4 стр.
ASTM D6585-11
Заменен
Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape — 4 стр.
ASTM D4216-13
Заменен
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds — 5 стр.
ASTM D635-14
Заменен
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position — 7 стр.
ASTM D6783-05(2011)
Заменен
Standard Specification for Polymer Concrete Pipe — 7 стр.
ASTM D2115-10
Заменен
Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions — 3 стр.
ASTM F1499-12
Заменен
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) — 9 стр.
ASTM D4551-12
Заменен
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane — 9 стр.
ASTM D5204-13
Заменен
Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials — 8 стр.
ASTM D1494-12
Заменен
Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels — 4 стр.
ASTM D5319-12
Заменен
Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels — 4 стр.
ASTM F1741-08(2016)
Заменен
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits — 9 стр.
ASTM C591-16
Заменен
Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate<brk/>Thermal Insulation — 9 стр.
ASTM F1483-15
Заменен
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe — 5 стр.
ASTM D4273-11
Заменен
Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols — 8 стр.
ASTM D4661-13
Заменен
Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates — 5 стр.
ASTM D5575-07(2013)
Заменен
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers — 12 стр.
ASTM D5740-16
Заменен
Standard Guide for Writing Material Standards in the Classification <astmref design="D4000"/> Format — 5 стр.
ASTM D4660-12
Заменен
Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate — 6 стр.
ASTM F1027-86(2012)
Заменен
Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices — 11 стр.
ASTM C945-05(2012)
Заменен
Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels — 11 стр.
ASTM D256-10e1
Заменен
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics — 20 стр.
ASTM D7616/D7616M-11
Заменен
Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures — 7 стр.
ASTM D3275-08(2013)
Заменен
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials — 4 стр.
ASTM D4895-16
Заменен
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion — 14 стр.
ASTM D6264/D6264M-12
Заменен
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force — 11 стр.
ASTM D7211-13
Заменен
Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use — 4 стр.
ASTM F1173-01(2012)
Заменен
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications — 15 стр.
ASTM D7137/D7137M-12
Заменен
Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates — 16 стр.
ASTM D3030-11
Заменен
Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins — 2 стр.
ASTM D6117-16
Заменен
Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes — 9 стр.
ASTM D3681-12e1
Заменен
Standard Test Method for Chemical Resistance of “;Fiberglass”; &#40;Glass–Fiber–Reinforced Thermosetting-Resin&#41; Pipe in a Deflected Condition — 8 стр.
ASTM D5365-12
Заменен
Standard Test Method for Long-Term Ring-Bending Strain of “;Fiberglass”; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe — 8 стр.
ASTM F3203-16
Заменен
Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing — 9 стр.
ASTM D2343-09
Заменен
Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics — 7 стр.
ASTM D6262-12
Заменен
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) — 9 стр.
ASTM D6041-11
Заменен
Standard Specification for Contact-Molded <span class='unicode'>“</span>Fiberglass<span class='unicode'>”</span> (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings — 7 стр.