Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM E145-19

Заменен
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens — 3 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM E145-94(2011)
Заменен
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens — 2 стр.
ASTM E145-19(2024)
Действует
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens — 3 стр.

На этот документ ссылаются

ASTM F2894-19
Заменен
Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven — 7 стр.
ASTM F2894-14
Заменен
Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven — 7 стр.
ASTM C910-16
Заменен
Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants — 3 стр.
ASTM C120/C120M-15a
Заменен
Standard Test Methods for Flexure Testing of Structural and Roofing Slate — 4 стр.
ASTM C765-97(2015)
Заменен
Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants — 2 стр.
ASTM E145-19(2024)
Действует
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens — 3 стр.
ASTM E145-94(2011)
Заменен
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens — 2 стр.
ASTM D5087-02(2014)
Заменен
Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) — 3 стр.
ASTM D5329-16
Заменен
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements — 9 стр.
ASTM D3769-15
Заменен
Standard Test Method for Microcellular Urethanes—;High-Temperature Sag — 3 стр.
ASTM D5095-91(2013)
Заменен
Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments — 3 стр.
ASTM D350-13
Заменен
Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation — 10 стр.
ASTM D5200-03(2014)
Заменен
Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans — 3 стр.
ASTM D5721-08(2018)
Заменен
Standard Practice for Air-Oven Aging of Polyolefin Geomembranes — 3 стр.
ASTM D5860-95(2013)
Заменен
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens — 3 стр.
ASTM D2383-14
Заменен
Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions — 2 стр.
ASTM D2369-10(2015)e1
Заменен
Standard Test Method for Volatile Content of Coatings — 5 стр.
ASTM D5268-13
Заменен
Standard Specification for Topsoil Used for Landscaping Purposes — 3 стр.
ASTM D2232-14(2018)
Заменен
Standard Test Method for Evaporating Residue of Naphthalene — 3 стр.
ASTM D7626-19
Заменен
Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay — 6 стр.
ASTM D6147-97(2014)
Заменен
Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—;Determination of Force Decay (Stress Relaxation) in Compression — 7 стр.
ASTM D5887/D5887M-22a
Заменен
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter — 8 стр.
ASTM D5268-22
Заменен
Standard Specification for Topsoil Used for Landscaping and Construction Purposes — 3 стр.
ASTM D2259-02(2016)e1
Заменен
Standard Test Method for Shrinkage of Yarns — 6 стр.
ASTM D4713-12
Заменен
Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems — 3 стр.
ASTM D5419-14a
Заменен
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures — 5 стр.
ASTM D5268-19
Заменен
Standard Specification for Topsoil Used for Landscaping and Construction Purposes — 3 стр.
ASTM D4350-16
Заменен
Standard Test Method for Corrosivity Index of Plastics and Fillers — 5 стр.
ASTM D5240/D5240M-12(2013)e1
Заменен
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate — 7 стр.
ASTM D6189-97(2014)
Заменен
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings — 2 стр.
ASTM D5312/D5312M-12(2013)
Заменен
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions — 6 стр.
ASTM D4373-14
Заменен
Standard Test Method for Rapid Determination of Carbonate Content of Soils — 5 стр.
ASTM D2684/D2684M-15
Заменен
Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products (Withdrawn 2024) — 5 стр.
ASTM D3791/D3791M-11(2018)
Заменен
Standard Practice for Evaluating the Effects of Heat on Asphalts — 2 стр.
ASTM D3194-17
Заменен
Standard Test Method for Rubber From Natural Sources—;Plasticity Retention Index (PRI) — 3 стр.
ASTM D806-11
Заменен
Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures — 4 стр.
ASTM D5403-93(2013)
Заменен
Standard Test Methods for Volatile Content of Radiation Curable Materials — 4 стр.
ASTM D3191-10(2014)
Заменен
Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—;Recipe and Evaluation Procedures — 8 стр.
ASTM D926-17
Заменен
Standard Test Method for Rubber Property—;Plasticity and Recovery (Parallel Plate Method) — 4 стр.
ASTM D4215-07(2013)
Заменен
Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures — 3 стр.
ASTM D6532-00(2014)
Заменен
Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens — 3 стр.
ASTM D1917-03(2017)
Заменен
Standard Test Methods for Rubber Property—;Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) — 4 стр.
ASTM D5268-19e1
Заменен
Standard Specification for Topsoil Used for Landscaping and Construction Purposes — 3 стр.
ASTM D5887/D5887M-16
Заменен
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter — 8 стр.
ASTM D5887/D5887M-20
Заменен
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter — 8 стр.
ASTM D6150-16
Заменен
Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility — 3 стр.
ASTM D6511/D6511M-18
Заменен
Standard Test Methods for Solvent Bearing Bituminous Compounds — 9 стр.
ASTM D6/D6M-95(2018)
Заменен
Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds — 3 стр.
ASTM D2369-20
Заменен
Standard Test Method for Volatile Content of Coatings — 6 стр.
ASTM D6419-00(2017)
Заменен
Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks — 3 стр.
ASTM D5993-18
Заменен
Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners — 4 стр.
ASTM D7767-11(2018)
Заменен
Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them — 6 стр.
ASTM D5887/D5887M-22
Заменен
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter — 8 стр.
ASTM D2973-16
Заменен
Standard Test Method for Total Nitrogen in Peat Materials — 3 стр.
ASTM D471-16a
Заменен
Standard Test Method for Rubber Property—;Effect of Liquids — 16 стр.
ASTM D2973-22
Заменен
Standard Test Method for Total Nitrogen in Peat Materials — 4 стр.
ASTM D559/D559M-15
Заменен
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures — 6 стр.
ASTM D244-09(2017)
Заменен
Standard Test Methods and Practices for Emulsified Asphalts — 9 стр.
ASTM D7969-16
Заменен
Standard Specification for Gravity Convection and Forced Ventilation Ovens — 4 стр.
ASTM D1934-95(2012)
Заменен
Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method — 3 стр.
ASTM D2060-14e1
Заменен
Standard Test Methods for Measuring Zipper Dimensions — 9 стр.
ASTM D2067-97(2013)
Заменен
Standard Test Method for Coarse Particles in Printing Ink Dispersions — 3 стр.
ASTM D2216-10
Заменен
Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass — 7 стр.
ASTM D2259-02(2016)
Заменен
Standard Test Method for Shrinkage of Yarns — 6 стр.
ASTM D2561-17
Заменен
Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers — 7 стр.
ASTM D3030-17
Заменен
Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins — 3 стр.
ASTM D4829-19
Заменен
Standard Test Method for Expansion Index of Soils — 7 стр.
ASTM D4829-11
Заменен
Standard Test Method for Expansion Index of Soils — 5 стр.
ASTM D3910-15
Заменен
Standard Practices for Design, Testing, and Construction of Slurry Seal — 8 стр.
ASTM D559/D559M-15(2023)
Заменен
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures — 6 стр.
ASTM D6372-15
Заменен
Standard Practice for Design, Testing, and Construction of Microsurfacing — 8 стр.
ASTM D3910-21
Заменен
Standard Practices for Design, Testing, and Construction of Slurry Seal — 8 стр.
ASTM D6489-99(2012)
Заменен
Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating — 3 стр.
ASTM D5890-18
Заменен
Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners — 7 стр.
ASTM D573-04(2015)
Заменен
Standard Test Method for Rubber—;Deterioration in an Air Oven — 6 стр.
ASTM D925-14
Заменен
Standard Test Methods for Rubber Property—;Staining of Surfaces (Contact, Migration, and Diffusion) — 6 стр.
ASTM D3314-02(2017)
Заменен
Standard Test Method for Rubber—;Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices — 4 стр.
ASTM C771-14
Заменен
Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants — 2 стр.
ASTM C772-03(2014)
Заменен
Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants — 2 стр.
ASTM D3182-16
Заменен
Standard Practice for Rubber—;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets — 8 стр.
ASTM D7382-08
Заменен
Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer (Withdrawn 2017) — 12 стр.
ASTM D3182-21
Заменен
Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets — 8 стр.
ASTM D1754/D1754M-09(2014)
Заменен
Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) — 7 стр.
ASTM F2524-06(2013)
Заменен
Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications — 2 стр.
ASTM D4570-02(2017)
Заменен
Standard Test Method for Rubber Chemicals—;Determination of Particle Size of Sulfur by Sieving (Dry) — 2 стр.
ASTM D5668-19
Заменен
Standard Test Methods for Rubber From Synthetic Sources—;Volatile Matter — 3 стр.
ASTM D5668-09(2014)
Заменен
Standard Test Methods for Rubber From Synthetic Sources—;Volatile Matter — 3 стр.
ASTM D2974-14
Заменен
Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils — 4 стр.
ASTM D2974-20
Заменен
Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils — 4 стр.
ASTM E2785-14
Заменен
Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions — 8 стр.
ASTM D6766-18
Заменен
Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions — 9 стр.
ASTM D6766-20
Заменен
Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions — 11 стр.
ASTM D1766-05(2016)
Заменен
Standard Test Method for Rubber Chemicals—;Solubility — 2 стр.