Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыASTM

ASTM E177-13

Заменен
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods — 10 стр.
ОписаниеСсылкиВерсии

Ссылочные документы

ASTM E177-10
Заменен
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods — 12 стр.
ASTM E177-14
Заменен
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods — 9 стр.
ASTM E1488-12e1
Заменен
Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods — 9 стр.
ASTM E2586-13
Заменен
Standard Practice for Calculating and Using Basic Statistics — 18 стр.
ASTM E2282-13
Заменен
Standard Guide for Defining the Test Result of a Test Method — 3 стр.
ASTM E691-13
Заменен
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method — 22 стр.
ASTM E2587-12
Заменен
Standard Practice for Use of Control Charts in Statistical Process Control — 23 стр.
ASTM E456-13ae1
Заменен
Standard Terminology Relating to Quality and Statistics — 10 стр.

На этот документ ссылаются

ASTM F558-11
Заменен
Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners — 16 стр.
ASTM F2894-12b
Заменен
Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven — 6 стр.
ASTM F2095-07e1
Заменен
Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates — 6 стр.
ASTM F3004-13
Заменен
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound — 5 стр.
ASTM F608-11
Заменен
Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners — 20 стр.
ASTM F2150-07
Заменен
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products — 10 стр.
ASTM F1868-12
Заменен
Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate — 9 стр.
ASTM F2199-09
Заменен
Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat — 3 стр.
ASTM F1888-09
Заменен
Test Method for Compression-Displacement of Baseballs and Softballs — 3 стр.
ASTM F1717-13
Заменен
Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model — 22 стр.
ASTM F2845-11
Заменен
Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs — 5 стр.
ASTM C651-11
Заменен
Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature — 4 стр.
ASTM C1114-06
Заменен
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus — 10 стр.
ASTM C958-92(2007)
Заменен
Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation — 2 стр.
ASTM C1285-02(2008)
Заменен
Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) — 23 стр.
ASTM C1259-08e1
Заменен
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration — 17 стр.
ASTM C469/C469M-10
Заменен
Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression — 5 стр.
ASTM C1326-08e1
Заменен
Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics — 9 стр.
ASTM C549-81(1986)
Заменен
Standard Specification for Perlite Loose Fill Insulation — 6 стр.
ASTM C670-10
Заменен
Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials — 9 стр.
ASTM G109-07
Заменен
Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments — 6 стр.
ASTM G143-03(2009)
Заменен
Standard Test Method for Measurement of Web/Roller Friction Characteristics — 8 стр.
ASTM G141-09
Заменен
Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials — 7 стр.
ASTM G132-96(2007)
Заменен
Standard Test Method for Pin Abrasion Testing — 8 стр.
ASTM E646-07
Заменен
Standard Test Method for Tensile Strain-Hardening Exponents (<span class="bdit">n</span> -Values) of Metallic Sheet Materials — 9 стр.
ASTM E1875-08
Заменен
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance — 9 стр.
ASTM E766-98(2008)e1
Заменен
Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope — 6 стр.
ASTM E1574-98(2006)
Заменен
Standard Test Method for Measurement of Sound in Residential Spaces — 4 стр.
ASTM E2008-08
Заменен
Standard Test Method for Volatility Rate by Thermogravimetry — 8 стр.
ASTM E2782-11
Заменен
Standard Guide for Measurement Systems Analysis (MSA) — 26 стр.
ASTM E2584-10
Заменен
Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter — 11 стр.
ASTM E2792-11
Заменен
Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion — 5 стр.
ASTM E29-08
Заменен
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications — 5 стр.
ASTM E826-08(2013)
Заменен
Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry — 28 стр.
ASTM E826-08
Заменен
Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry — 27 стр.
ASTM E1782-08
Заменен
Standard Test Method for Determining Vapor Pressure by Thermal Analysis — 6 стр.
ASTM E2282-09
Заменен
Standard Guide for Defining the Test Result of a Test Method — 3 стр.
ASTM E1489-08
Заменен
Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device — 16 стр.
ASTM E2161-01
Заменен
Standard Terminology Relating to Performance Validation in Thermal Analysis — 2 стр.
ASTM E2161-08
Заменен
Standard Terminology Relating to Performance Validation in Thermal Analysis — 2 стр.
ASTM E2161-07
Заменен
Standard Terminology Relating to Performance Validation in Thermal Analysis — 2 стр.
ASTM E2161-06
Заменен
Standard Terminology Relating to Performance Validation in Thermal Analysis — 2 стр.
ASTM E2161-07a
Заменен
Standard Terminology Relating to Performance Validation in Thermal Analysis — 2 стр.
ASTM E2161-06a
Заменен
Standard Terminology Relating to Performance Validation in Thermal Analysis — 2 стр.
ASTM E1617-09
Заменен
Standard Practice for Reporting Particle Size Characterization Data — 6 стр.
ASTM E691-13
Заменен
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method — 22 стр.
ASTM E399-12e2
Заменен
Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K<inf>Ic</inf > of Metallic Materials — 33 стр.
ASTM E572-12
Заменен
Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-ray Fluorescence Spectrometry — 11 стр.
ASTM E399-12e1
Заменен
Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K<inf>Ic</inf > of Metallic Materials — 33 стр.
ASTM E96/E96M-12
Заменен
Standard Test Methods for Water Vapor Transmission of Materials — 12 стр.
ASTM E28-67(1982)e1
Заменен
Standard test Method for Softening Point by Ring-and-Ball Apparatus — 7 стр.
ASTM E1356-08
Заменен
Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry — 4 стр.
ASTM A343/A343M-03(2008)
Заменен
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame — 16 стр.
ASTM A1013-00(2005)
Заменен
Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method — 4 стр.
ASTM A977/A977M-07
Заменен
Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs — 12 стр.
ASTM D6543-00(2012)e1
Заменен
Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers — 10 стр.
ASTM D5403-93(2007)
Заменен
Standard Test Methods for Volatile Content of Radiation Curable Materials — 4 стр.
ASTM D4180-03(2008)
Заменен
Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers — 3 стр.
ASTM D7472-09
Заменен
Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials — 3 стр.
ASTM D7477-08
Заменен
Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water — 4 стр.
ASTM D2344/D2344M-00(2006)
Заменен
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates — 8 стр.
ASTM D4562-01(2007)
Заменен
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen — 4 стр.
ASTM D198-09
Заменен
Standard Test Methods of Static Tests of Lumber in Structural Sizes — 26 стр.
ASTM D7471-09
Заменен
Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials — 3 стр.
ASTM D5961/D5961M-10
Заменен
Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates — 32 стр.
ASTM D7027-05e1
Заменен
Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine — 8 стр.
ASTM D7249/D7249M-12
Заменен
Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure — 9 стр.
ASTM D4735-09
Заменен
Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography — 6 стр.
ASTM D7430-13
Заменен
Standard Practice for Mechanical Sampling of Coal — 41 стр.
ASTM D4438-85(2007)
Заменен
Standard Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting — 3 стр.
ASTM D5158-98(2005)
Заменен
Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving — 3 стр.
ASTM D7430-12b
Заменен
Standard Practice for Mechanical Sampling of Coal — 41 стр.
ASTM D3953-12
Заменен
Standard Specification for Strapping, Flat Steel and Seals — 15 стр.
ASTM D4164-03(2008)
Заменен
Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers — 2 стр.
ASTM D6484/D6484M-09
Заменен
Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates — 16 стр.
ASTM D7514-09
Заменен
Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment — 4 стр.
ASTM D7735-11
Заменен
Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures — 4 стр.
ASTM D698-12
Заменен
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 ;400 ft-lbf/ft<sup>3</sup> ;(600 kN-m/m<sup>3</sup>)) — 13 стр.
ASTM D6415/D6415M-06ae1
Заменен
Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite — 10 стр.
ASTM D7515-09
Заменен
Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method) — 6 стр.
ASTM D3465-00(2007)e1
Заменен
Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography — 3 стр.
ASTM D5528-01(2007)e3
Заменен
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites — 12 стр.
ASTM D7674-10
Заменен
Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White — 4 стр.
ASTM D6671/D6671M-06
Заменен
Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites — 14 стр.
ASTM D6132-08
Заменен
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage — 3 стр.
ASTM D4607-94(2011)
Заменен
Standard Test Method for Determination of Iodine Number of Activated Carbon — 5 стр.
ASTM D7476-08
Заменен
Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins — 3 стр.
ASTM D198-13
Заменен
Standard Test Methods of Static Tests of Lumber in Structural Sizes — 27 стр.
ASTM D4085-93(2008)
Заменен
Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry — 3 стр.
ASTM D7426-08
Заменен
Standard Test Method for Assignment of the DSC Procedure for Determining T<sub>g</sub> of a Polymer or an Elastomeric Compound — 4 стр.
ASTM D3670-91(2007)
Заменен
Standard Guide for Determination of Precision and Bias of Methods of Committee D22 — 5 стр.
ASTM D854-10
Заменен
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer — 7 стр.
ASTM D1353-83e1
Заменен
Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products — 2 стр.
ASTM D5147/D5147M-11a
Заменен
Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material — 8 стр.
ASTM D1894-11e1
Заменен
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting — 7 стр.
ASTM D1353-96
Заменен
Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products — 2 стр.
ASTM D3498-93
Заменен
Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems — 7 стр.
ASTM D1335-67
Заменен
Standard Method Of Test For Tuft Bind Of Pile Floor Coverings — 4 стр.
ASTM D3906-03(2008)
Заменен
Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials — 7 стр.
ASTM D4567-03(2008)
Заменен
Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method — 4 стр.