Причина отмены This practice covers guidance for the statistical analysis of laboratory data on the toxicity of chemicals or mixtures of chemicals to aquatic or terrestrial plants and animals. This practice applies only to the analysis of the data, after the test has been completed. All design concerns, such as the statement of the null hypothesis and its alternative, the choice of alpha and beta risks, the identification of experimental units, possible pseudo replication, randomization techniques, and the execution of the test are beyond the scope of this practice. This practice is not a textbook, nor does it replace consultation with a statistician. It assumes that the investigator recognizes the structure of his experimental design, has identified the experimental units that were used, and understands how the test was conducted. Given this information, the proper statistical analyses can be determined for the data.

Formerly under the jurisdiction of Committee E50 on Environmental Assessment, Risk Management and Corrective Action, this practice was withdrawn in January 2022 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

4.1 The use of statistical analysis will enable the investigator to make better, more informed decisions when using the information derived from the analyses.

4.1.1 The goals when performing statistical analyses, are to summarize, display, quantify, and provide objective measures for assessing the relationships and anomalies in data. Statistical analyses also involve fitting a model to the data and making inferences from the model. The type of data dictates the type of model to be used. Statistical analysis provides the means to test differences between control and treatment groups (one form of hypothesis testing), as well as the means to describe the relationship between the level of treatment and the measured responses (concentration effect curves), or to quantify the degree of uncertainty in the end-point estimates derived from the data.

4.1.2 The goals of this practice are to identify and describe commonly used statistical procedures for toxicity tests. Fig. 1, Section 6, following statistical methods (Section 5), presents a flow chart and some recommended analysis paths, with references. From this guideline, it is recommended that each investigator develop a statistical analysis protocol specific to his test results. The flow chart, along with the rest of this guideline, may provide both useful direction, and service as a quality assurance tool, to help ensure that important steps in the analysis are not overlooked.

FIG. 1  Flow Chart for Practice for Statistical Analysis
FIG. 1  Flow Chart for Practice for Statistical Analysis (continued)
FIG. 1  Flow Chart for Practice for Statistical Analysis (continued)
FIG. 1  Flow Chart for Practice for Statistical Analysis (continued) Область применения

1.1 This practice covers guidance for the statistical analysis of laboratory data on the toxicity of chemicals or mixtures of chemicals to aquatic or terrestrial plants and animals. This practice applies only to the analysis of the data, after the test has been completed. All design concerns, such as the statement of the null hypothesis and its alternative, the choice of alpha and beta risks, the identification of experimental units, possible pseudo replication, randomization techniques, and the execution of the test are beyond the scope of this practice. This practice is not a textbook, nor does it replace consultation with a statistician. It assumes that the investigator recognizes the structure of his experimental design, has identified the experimental units that were used, and understands how the test was conducted. Given this information, the proper statistical analyses can be determined for the data.

1.1.1 Recognizing that statistics is a profession in which research continues in order to improve methods for performing the analysis of scientific data, the use of statistical methods other than those described in this practice is acceptable as long as they are properly documented and scientifically defensible. Additional annexes may be developed in the future to reflect comments and needs identified by users, such as more detailed discussion of probit and logistic regression models, or statistical methods for dose response and risk assessment.

1.2 The sections of this guide appear as follows:

Title     

Section

 

Referenced Documents

2

Terminology

3

Significance and Use

4

Statistical Methods

5

Flow Chart

6

Flow Chart Comments

7

Keywords

8

References

 

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.