Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM E2209-13

Заменен
Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry — 6 стр.
Значение и использование

5.1 The chemical composition of high manganese steel alloys must be determined accurately to ensure the desired metallurgical properties. This procedure is suitable for manufacturing control and inspection testing.

Область применения

1.1 This test method provides for the analysis of high manganese steel by spark atomic emission spectrometry for the following elements in the ranges shown:

Elements

Conposition Range, %

 

 

Aluminum (Al)

0.02 to 0.15

Carbon (C)

0.3 to 1.4

Chromium (Cr)

0.25 to 2.00

Manganese (Mn)

8.0 to 16.2

Molybdenum (Mo)

0.03 to 2.0

Nickel (Ni)

0.05 to 4.0

Phosphorus (P)

0.025 to 0.06

Silicon (Si)

0.25 to 1.5


Note 1The ranges represent the actual levels at which this method was tested.2 These composition ranges can be extended to higher compositions by the use of suitable reference materials. Sulfur is not included because differences in results between laboratories exceeded acceptable limits at all analyte levels.

1.2 This test method may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ICS
77.040.30 Chemical analysis of metals / Химический анализ металлов
Сборник ASTM
03.05 Analytical Chemistry for Metals, Ores, and Related Materials / Аналитическая химия для металлов, руд и сопутствующих материалов: с E32 и далее
Тематика
Analytical Chemistry